Club3G Forums - View Single Post

Ithinkyou · 11/04/2009, 03:03 PM

I never had to mess with those multipliers either

you could try this hex for starters. If your ecu is still hittin 36 then youll know somethin else is faulty.

Change Periphery0 to

>>>0x5658-no rear O2, No knock sensor<<<

56D8-no rear O2
5698, no front or rear 02

Change Periphery2 to 0x0DDF

- Changes a few things to not supported within the obdII scan when you get your car inspected , and allows you to clean up all the little vacume lines and solenoids hanging on the back of the intake manifold. It gets rid of all these CEL's P0443 , P0446 , P0403 , P0243 , P0090 , P2263 , P0450 , P0451 , P0452 , P0453 , P0441 , P0442 if your throwing any of them...

Change Periphery3 to 0xC0C0
Change Periphery4 to 0xFE00

Now the wastegate solenoid and fuel solenoid are disabled in the ECU. Without this step you will trip codes P0243 and P0090 for the missing solenoids.

I wish i could find what hexes relate to what periphery bits that would be great cuz you could knowingly turn all kinds of crap on and off for your own personal setup.
I found this on evo in less than a minute plus some other stuff but i wont post it. I will clue that the guy dropped a 3g motor in a lancer.

11/04/2009, 03:03 PM	#197 (permalink)
Ithinkyou Senior Member Join Date: Jun 2006 Location: Cali Vehicle: 02 GS Posts: 1,489	I never had to mess with those multipliers either you could try this hex for starters. If your ecu is still hittin 36 then youll know somethin else is faulty. Change Periphery0 to >>>0x5658-no rear O2, No knock sensor<<< 56D8-no rear O2 5698, no front or rear 02 Change Periphery2 to 0x0DDF - Changes a few things to not supported within the obdII scan when you get your car inspected , and allows you to clean up all the little vacume lines and solenoids hanging on the back of the intake manifold. It gets rid of all these CEL's P0443 , P0446 , P0403 , P0243 , P0090 , P2263 , P0450 , P0451 , P0452 , P0453 , P0441 , P0442 if your throwing any of them... Change Periphery3 to 0xC0C0 Change Periphery4 to 0xFE00 Now the wastegate solenoid and fuel solenoid are disabled in the ECU. Without this step you will trip codes P0243 and P0090 for the missing solenoids. I wish i could find what hexes relate to what periphery bits that would be great cuz you could knowingly turn all kinds of crap on and off for your own personal setup. I found this on evo in less than a minute plus some other stuff but i wont post it. I will clue that the guy dropped a 3g motor in a lancer. __________________ 2002 GS 5spd, Wrx modded 440s Greddy Type-S Megan Racing Evo 8 Manifold Evo 9 turbine Invidia SS O2 Dump Custom 3" DP Catco 3" HFC Greddy EVO2 modded 3" Injen LICP Zietronix ZT2 Prosport boost fuel press. oil press. oil temp. EGT G-Speed CF hood, Tien S-techs, ADR fuel bronze 17" wheels, OLD - 2000 RS 5spd Last edited by Ithinkyou; 11/04/2009 at 03:18 PM.