So I've bought my 2003 Eclipse Spyder GTS in 2009 and I absolutely love it. I came across this forum several months ago and ever since I am constantly on it looking for ideas and learning from everyone. I've been hesitant to show you guys since I hit a stupid deer in November going from NorCal back home to Idaho, in Oregon doing 60, and it's not very pretty right now. But I've figured to just do it and get some feedback. Plus today has been the warmest day of the year (at only 69ish) so It was perfect for taking some pics
So feel free to comment/make suggestions/criticize.
Modifications:
Interior:
-Black leather interior swap w/ custom white cross-stitching
-Heated seats
-LED interior swap: Red.
-Dome light LED: White
-Door triggered white LED footwell lighting
-Color matched headunit remote
-Color matched painted door panel strip
-Black dyed door panel armrests
-Black dyed arm rest
-Black dyed/painted seat plastics
-CF vinyl wrapped convertible top pillars
Audio:
-Pioneer® AVH-P4300DVD headunit
-Video brake bypass
-Rockford Fosgate® P1694, 6x9 speakers
-Rockford Fosgate® P1652-S, 6.5" component speakers
-Rockford Fosgate® P400-4, 4 way amplifier
-Rockford Fosgate® P500-2, 2 way amplifier
-10" Sony® sub, until I get the P2
Exterior:
-New paint color: Summit White
-Dual Halo Projector Headlights
-Modded '03 stock tail lights, black with LED rings
-New signal markers
-Black 3rd brake light w/ red LED bulb
-Painted red calipers
-5% tint all around
-Backup Camera Installed
-Debadged
-Color matched gas cap
-Yellow fog light tint
-Black taillight tint
Wheels/Tires/Suspension:
-19" x 8.5" +32 Stern ST-5 gloss black wheels
-Color matched Summit White lips
-Federal 225/35/ZR19 rubber bands
-Gloss black tuner lugs
-Powder coated gloss black center cap rings
-Custom "Kobe" logo center caps
-D2 Racing Coilovers
-Ingalls rear camber kit
-Moog front and rear end links
-Rolled fenders/quarters
Beneath the Bonnet:
-Injen annodized red cold air intake.
-New spark plugs
-New spark plug wires
-Replaced valve cover gaskets
-TYC A/C condenser
-New radiator
Purchased, not yet installed:
-Prothane motor mounts
Future Mods:
<strike>-AEM/Injen intake</strike>
<strike>-D2 Coilovers</strike>
-Brembo swap
-Powerslot slotted rotors
<strike>-19" Stern ST-5</strike>
<strike>-Rockford Fosgate P1694, 6x9 speakers</strike>
<strike>-Rockford Fosgate P1652-S, 6.5" component speakers</strike>
<strike>-Rockford Fosgate P400-4, 4 way amplifier</strike>
-2 Rockford Fosgate P2 subs
<strike>-Rockford Fosgate P500-2 amp</strike>
-Rockford Fosgate P132, 3.5" speaker for dash
-Modified custom front bumper
<strike>-New leather. Black</strike>/white inserts
<strike>-Paint some interior components</strike>
<strike>-heated seats</strike>
-Redlinegoods armrest cover and ebrake cover
-Put my NES in it, maybe
-new reverse lights
Suggestions accepted
Don't really want to put much into performance since it's an automatic:dunno:
But let me know what I should look into
Can't find a pic from the day I got her, but heres what I started with.. if you ignore the messed up front end. haha. Nice and stock and in a tree
So here are some pics from when I started my members ride thread (this is after I hit a deer):
Damn Oregon deers!:rant2:
Dual halo projectors. I know, that lining thing around it needs to be taken care of:happysad:
Top down
My goal is to keep my Eclipse original, clean, and respected by the Club3G community
So feel free to comment/make suggestions/criticize.
Modifications:
Interior:
-Black leather interior swap w/ custom white cross-stitching
-Heated seats
-LED interior swap: Red.
-Dome light LED: White
-Door triggered white LED footwell lighting
-Color matched headunit remote
-Color matched painted door panel strip
-Black dyed door panel armrests
-Black dyed arm rest
-Black dyed/painted seat plastics
-CF vinyl wrapped convertible top pillars
Audio:
-Pioneer® AVH-P4300DVD headunit
-Video brake bypass
-Rockford Fosgate® P1694, 6x9 speakers
-Rockford Fosgate® P1652-S, 6.5" component speakers
-Rockford Fosgate® P400-4, 4 way amplifier
-Rockford Fosgate® P500-2, 2 way amplifier
-10" Sony® sub, until I get the P2
Exterior:
-New paint color: Summit White
-Dual Halo Projector Headlights
-Modded '03 stock tail lights, black with LED rings
-New signal markers
-Black 3rd brake light w/ red LED bulb
-Painted red calipers
-5% tint all around
-Backup Camera Installed
-Debadged
-Color matched gas cap
-Yellow fog light tint
-Black taillight tint
Wheels/Tires/Suspension:
-19" x 8.5" +32 Stern ST-5 gloss black wheels
-Color matched Summit White lips
-Federal 225/35/ZR19 rubber bands
-Gloss black tuner lugs
-Powder coated gloss black center cap rings
-Custom "Kobe" logo center caps
-D2 Racing Coilovers
-Ingalls rear camber kit
-Moog front and rear end links
-Rolled fenders/quarters
Beneath the Bonnet:
-Injen annodized red cold air intake.
-New spark plugs
-New spark plug wires
-Replaced valve cover gaskets
-TYC A/C condenser
-New radiator
Purchased, not yet installed:
-Prothane motor mounts
Future Mods:
<strike>-AEM/Injen intake</strike>
<strike>-D2 Coilovers</strike>
-Brembo swap
-Powerslot slotted rotors
<strike>-19" Stern ST-5</strike>
<strike>-Rockford Fosgate P1694, 6x9 speakers</strike>
<strike>-Rockford Fosgate P1652-S, 6.5" component speakers</strike>
<strike>-Rockford Fosgate P400-4, 4 way amplifier</strike>
-2 Rockford Fosgate P2 subs
<strike>-Rockford Fosgate P500-2 amp</strike>
-Rockford Fosgate P132, 3.5" speaker for dash
-Modified custom front bumper
<strike>-New leather. Black</strike>/white inserts
<strike>-Paint some interior components</strike>
<strike>-heated seats</strike>
-Redlinegoods armrest cover and ebrake cover
-Put my NES in it, maybe
-new reverse lights
Suggestions accepted
Don't really want to put much into performance since it's an automatic:dunno:
But let me know what I should look into
Can't find a pic from the day I got her, but heres what I started with.. if you ignore the messed up front end. haha. Nice and stock and in a tree
So here are some pics from when I started my members ride thread (this is after I hit a deer):
Damn Oregon deers!:rant2:
Dual halo projectors. I know, that lining thing around it needs to be taken care of:happysad:
Top down
My goal is to keep my Eclipse original, clean, and respected by the Club3G community