What did you do to the 3G today? - Page 8 - Club3G Forum : Mitsubishi Eclipse 3G Forums

grfft3r · 07/28/2012, 06:24 AM

Gave the outgoing COTM a night wash. Used an old toothbrush to clean the Brembos.

works good (saw it from Matt).

chavezeclipse · 07/29/2012, 11:03 AM

went and bought a lower intake manifold with studs intact. cleaning it out then waiting for new gaskets to come. considering i am on a junkyard engine and i never replaced the lower intake manifold gaskets and cleaned it and probably not sealed the best right now it should make a hell of a difference. couple that with the xg350 upper manifold i am putting on looking to gain at least another 10 hp

2003GSspyder · 07/29/2012, 09:52 PM

I drove my spyder to the beach, and of course I always get compliments

Sent from my SAMSUNG-SGH-I997 using AutoGuide.Com Free App

fast gt · 07/31/2012, 12:09 AM

I Changed my drive belt

Sent from my N860 using AutoGuide.Com Free App

NOZER · 07/31/2012, 02:53 AM

Installed 2 10 inch subwoofers

branden3g · 07/31/2012, 06:03 AM

I removed the tint and then gave up when I got to the spotted part on the rear window..then went back only to remove everything inside except for dash, center console, and driver seat...STUPID window..smh

chavezeclipse · 07/31/2012, 03:21 PM

did throttle body bypass

Micborth · 07/31/2012, 04:42 PM

Quote:

Originally Posted by chino

How much for you to make me a wheel like that.

Sent from my iPhone using AG Free

Treyzian · 07/31/2012, 05:10 PM

It's an evo steering wheel... and I don't even want to bother to find when the quoted post was from...

Mattt · 07/31/2012, 05:20 PM

Quote:

Originally Posted by Micborth

How much for you to make me a wheel like that.

Sent from my iPhone using AG Free

What did you do to the 3G today?

3G Runner · 08/09/2012, 11:17 AM

I have read many people recommending Moog endlinks time and time again on this site, and let me tell you, if you have to use a hacksaw to get them bitched off, have fun. I tightened them down to 29ft/lbs, what it says to on the paper that comes with them, and somehow the nut almost came off but seized at the end. At that point, it was impossible for me to get it off, almost rounded off the inner nut. So took a hacksaw, and went at it. A shorter hacksaw probably would have made it easier(or a dremel, or a sawzall), but I eventually just took the damn blade off because there wasn't a lot of room in there. I am replacing both with another set of Moog endlinks because they are beefier then OEM endlinks. Not necessarily easier to take off. My old OEM ones came off without a hitch.

drunkoffjuic · 08/09/2012, 03:50 PM

No anti-seize was used?

Micborth · 08/09/2012, 06:34 PM

Changed my spark plugs and installed new speakers.

ADRIENNE · 08/09/2012, 07:10 PM

Washed the car. Then it downpoured...

Mattt · 08/09/2012, 07:14 PM

Quote:

Originally Posted by ADRIENNE

Washed the car. Then it downpoured...

ADRIENNE · 08/09/2012, 07:35 PM

Quote:

Originally Posted by newdie

Literally took the time today to clean all my wheels and brushed them clean and I go in for an hour and bam. Downpours.

Daboss254 · 08/09/2012, 08:07 PM

On the home stretch with my Built 6g74 motor swap. Just waiting for TB and exhaust piping gaskets. I also need to hook up vacuum lines and such.

drunkoffjuic · 08/09/2012, 08:40 PM

I walked past it today on my way through the garage

Does that count?

3G Runner · 08/10/2012, 06:07 AM

Quote:

Originally Posted by drunkoffjuic

No anti-seize was used?

I really don't remember, but from looking at my pics, it doesn't look like it. I just found it odd that the nut came to that resting position.

Corey16 · 08/10/2012, 07:55 AM

Quote:

Originally Posted by ADRIENNE

Just put in a cargo net

Why do you have $30 walmart speakers in your trunk lol??

ADRIENNE · 08/10/2012, 09:51 AM

Quote:

Originally Posted by Corey16

Why do you have $30 walmart speakers in your trunk lol??

Cuz they were free. And actually to my surprise sound pretty descent

Corey16 · 08/10/2012, 09:53 AM

Quote:

Originally Posted by ADRIENNE

Cuz they were free. And actually to my surprise sound pretty descent

Do you have them wired as speakers or as subwoofers?

ADRIENNE · 08/10/2012, 10:02 AM

Quote:

Originally Posted by Corey16

Do you have them wired as speakers or as subwoofers?

Speakers lol but my setting is set to bass booster so they sound like subs. When it stops raining Ill get a video for you.

MSP3G · 08/10/2012, 10:13 AM

Forget the speakers, why is there a razor scooter back there?!

I have been spending the last two days replacing the front sway bars, nite-shadding the rear corner lights and third brake light. What I have learned:

1. Whoever designed the bracket placement for the front sway bars is a douchbag.
2. Nite-shade is a fickle mistress and clear coat is a bitch when you screw it up once. =/

Corey16 · 08/10/2012, 10:14 AM

Quote:

Originally Posted by ADRIENNE

Speakers lol but my setting is set to bass booster so they sound like subs. When it stops raining Ill get a video for you.

Oh no I don't want a video. I am extremely knowledgeable about car audio. I just would never buy that in my entire life. Just can't see how someone would enjoy those unless that's the first thing they have ever had in their trunk closely related to subwoofer speakers. You should take those out and get some real subwoofer speakers soon lol unless you don't want subwoofers?

3G Runner · 08/10/2012, 10:23 AM

Quote:

Originally Posted by MSP3G

Forget the speakers, why is there a razor scooter back there?!

I have been spending the last two days replacing the front sway bars, nite-shadding the rear corner lights and third brake light. What I have learned:

1. Whoever designed the bracket placement for the front sway bars is a douchbag.
2. Nite-shade is a fickle mistress and clear coat is a bitch when you screw it up once. =/

I took one good long look at replacing the front sway bar, then did a search, and from what I found, it was a pita, and also counter-productive if you intent to track the car.

Did you actually get it replaced?

Corey16 · 08/10/2012, 10:34 AM

Quote:

Originally Posted by 3G Runner

I took one good long look at replacing the front sway bar, then did a search, and from what I found, it was a pita, and also counter-productive if you intent to track the car.

Did you actually get it replaced?

Exactly. For track use and daily driving there is no point in getting a bigger front sway bar. Only a bigger rear sway bar is what really matters. The Eclipse's rear sways outward badly on tight cornering, reason why I installed a Suspension Techniques rear sway bar years ago and wow what a difference lol.

ADRIENNE · 08/10/2012, 10:40 AM

Quote:

Originally Posted by Corey16

Oh no I don't want a video. I am extremely knowledgeable about car audio. I just would never buy that in my entire life. Just can't see how someone would enjoy those unless that's the first thing they have ever had in their trunk closely related to subwoofer speakers. You should take those out and get some real subwoofer speakers soon lol unless you don't want subwoofers?

Im getting better ones. And again these were free so... And plus All my other speakers and head unit are pioneer.

And the scooter was cuz I took my lil bro to the park. Lol

Corey16 · 08/10/2012, 10:50 AM

Quote:

Originally Posted by ADRIENNE

Im getting better ones. And again these were free so... And plus All my other speakers and head unit are pioneer.

And the scooter was cuz I took my lil bro to the park. Lol

Ah gotcha. I just remember when a buddy of mine had bought those same speakers but were 10's at walmart just to blow them. We used his sundown audio 2,000 watt amplifier and those things popped really hard then smoke came out

. I told him he was stupid for spending $50 or so bucks just to do something like that. He enjoyed it more than I did since he went to bass competitions for years and basically does it for a living pretty much.

I'm not a pioneer fan, I think their products aren't good but for people who aren't nuts for car audio they are good decent products for them I suppose.

ADRIENNE · 08/10/2012, 11:05 AM

Quote:

Originally Posted by Corey16

Ah gotcha. I just remember when a buddy of mine had bought those same speakers but were 10's at walmart just to blow them. We used his sundown audio 2,000 watt amplifier and those things popped really hard then smoke came out

. I told him he was stupid for spending $50 or so bucks just to do something like that. He enjoyed it more than I did since he went to bass competitions for years and basically does it for a living pretty much.

I'm not a pioneer fan, I think their products aren't good but for people who aren't nuts for car audio they are good decent products for them I suppose.

This does the job for now. Im hoping to build a custom box soon that wont take up all of my trunk space lol. Damn when Im done with these Ill try and do what your friend did. Or Ill take it to Upstate NY and shoot the hell out of it lol

Corey16 · 08/10/2012, 11:16 AM

Quote:

Originally Posted by ADRIENNE

This does the job for now. Im hoping to build a custom box soon that wont take up all of my trunk space lol. Damn when Im done with these Ill try and do what your friend did. Or Ill take it to Upstate NY and shoot the hell out of it lol

If you need an idea for a custom subwoofer box you can check my members ride thread since you have a GS and not a spyder. I have lots of room after I built my ported one for two 10" JL subwoofers. It only covers about half of my trunk. Lol I say you should just fill it up with lead.

drunkoffjuic · 08/11/2012, 08:21 PM

Zaino

Wash, clay bar, waxed the car. Photos to come.

SvenHoek · 08/11/2012, 09:31 PM

Registered it for another car show and then went on an organized "downtown cruise" last night. Today it was the 7 hour long Show'n'Shine, then drove it 3 hours back home so that I can do it again tomorrow in another city.

grfft3r · 08/11/2012, 10:26 PM

Quote:

Originally Posted by drunkoffjuic

Zaino

Wash, clay bar, waxed the car. Photos to come.

Are they better than Meguiar products?

drunkoffjuic · 08/11/2012, 10:32 PM

Quote:

Originally Posted by grfft3r

Are they better than Meguiar products?

To each their own. I have used Meguiar and now Zaino. I like Zaino better now.

you be the judge:
Drunkoffjuic's 02 GT

Got Rice Boy · 08/11/2012, 10:38 PM

Got some trunk space back.

From this:

To this:

Not 'show car' quality work, but definitely gives me some room for the near future.

grfft3r · 08/11/2012, 10:42 PM

^^^^ Whoa nice!

Red Sun · 08/11/2012, 10:59 PM

Nice audio setup

MyShadow · 08/13/2012, 04:17 AM

Done some carbon wrap:

ADRIENNE · 08/14/2012, 05:25 PM

Finally got around to getting the car to the shop and finished my parking sensor install

This is them on. The parking sensors go on when I put it in reverse. The power comes from the reverse light wires.

Heres a close up of the parking sensor.

This is the "brain". It hooks of the monitor to all the sensors and power.

And finally here is the parking sensor. It tells you how far you are in meters. And then to what side the object is.

neil12011 · 08/14/2012, 06:02 PM

Door panel strip

ADRIENNE · 08/14/2012, 06:04 PM

Nice. Is that cf overlay?

neil12011 · 08/14/2012, 06:44 PM

It's the vinyl cf stuff you find at autozone, I was actually quite surprised at the quality of it, it's good stuff, was about $12 for a roll. I sprayed a couple of clear coats over it.

neil12011 · 08/14/2012, 06:45 PM

Nice job on the parking sensor install, I dig.

ADRIENNE · 08/14/2012, 08:45 PM

Thanks man and I might have to go check out that cf stuff.

neil12011 · 08/14/2012, 09:58 PM

Use a heat gun on the curves at the end, you have to stretch it over them, no other way.

ccarrillo717 · 08/14/2012, 10:20 PM

Haven't drove my eclipse in 16 days

been carpooling

drunkoffjuic · 08/14/2012, 10:21 PM

I looked at it.

branden3g · 08/15/2012, 12:01 AM

I did a "stage 1" wire tuck.

do_0b in my GT

Ketchup · 08/15/2012, 11:44 PM

Car was staring rough for a good while and then the other morning i got out and it just barely started. Then later in the day i got in my car and it wouldn't turn over. Battery finally died on me. Went and got a new one and it's starting as good as it ever has for me.

Also finally replaced my hatch struts. So awesome to have a hatch that doesn't weigh a ton to open and actually stays open!!

Corey16 · 08/16/2012, 12:54 AM

Quote:

Originally Posted by Got Rice Boy

Got some trunk space back.

From this:

To this:

Not 'show car' quality work, but definitely gives me some room for the near future.

Haha man, I couldn't imagine how horrible that big box sounded since it was literally on the end of your trunk touching the car. No space for better bass distribution for better sound.

Great job on getting that fixed with the corner subs. Very nice!

Quote:

Originally Posted by branden3g

I did a "stage 1" wire tuck.

do_0b in my GT

Stage 1...the hell?? Don't you just mean a "small" wire tuck?

branden3g · 08/16/2012, 02:22 AM

Stage 1...the hell?? Don't you just mean a "small" wire tuck?[/QUOTE]
LOL Hence "stage 1" take a chill pill bro, obviously you know what I was talking about.

do_0b in my GT

Corey16 · 08/16/2012, 03:33 AM

Quote:

Originally Posted by branden3g

Stage 1...the hell?? Don't you just mean a "small" wire tuck?
LOL Hence "stage 1" take a chill pill bro, obviously you know what I was talking about.

do_0b in my GT

Well now I know you put stage 1 to be funny lol. I will take the pill if you do, so that way we can both have an adventurous trip.

branden3g · 08/16/2012, 04:03 AM

Quote:

Originally Posted by Corey16

Well now I know you put stage 1 to be funny lol. I will take the pill if you do, so that way we can both have an adventurous trip.

Will we now..lol you got yourself a date!

do_0b in my GT

3G Runner · 08/16/2012, 09:43 AM

Got tired of having the front on jack stands while waiting for hardware to finish it. Decided to take the front down and swap my rear coilovers. Everything went well with that.

ADRIENNE · 08/16/2012, 10:14 PM

Tried to figure out how to fix this..

grfft3r · 08/16/2012, 10:22 PM

^^^ Get a CF hood.

ADRIENNE · 08/16/2012, 10:28 PM

Quote:

Originally Posted by grfft3r

^^^ Get a CF hood.

Im searching for one. Its cheaper then getting it painted.

neil12011 · 08/16/2012, 11:28 PM

I always like cf hoods that were painted except for a strip to show the cf, I guess cf hoods always were too furious and or fast for my taste.

eligs · 08/17/2012, 12:36 AM

put on new tires, along with new swaybar bushings and endlinks for the rear, and a front strut brace aquired from the junkyard

07/28/2012, 06:24 AM	#421 (permalink)
grfft3r Photoshopper Join Date: Feb 2011 Location: Land of the Ricing Son Vehicle: 2001 Black Eclipse GT Posts: 3,016	Gave the outgoing COTM a night wash. Used an old toothbrush to clean the Brembos. works good (saw it from Matt). Last edited by grfft3r; 07/29/2012 at 11:09 AM. Reason: an*

07/29/2012, 11:03 AM	#422 (permalink)
chavezeclipse Chuck Nasty Join Date: Nov 2006 Location: md Vehicle: stuff Posts: 3,822	went and bought a lower intake manifold with studs intact. cleaning it out then waiting for new gaskets to come. considering i am on a junkyard engine and i never replaced the lower intake manifold gaskets and cleaned it and probably not sealed the best right now it should make a hell of a difference. couple that with the xg350 upper manifold i am putting on looking to gain at least another 10 hp __________________ charles whitney aka chuck nasty 2001 eclipse gt: hybrid clutch quiafe lsd custom 3" intake halo projectors evo enkei 17" rims 245/40 g-max 6g74 swap w/UIM/TB tein s tech kyb agx cmf headers poly mounts evo brakes UCS tune custom 2.5" exhaust csf 2 row radiator rear strut bar battery relocated to trunk 22mm rear sway bar ss brake lines nice sound system

07/31/2012, 03:21 PM	#427 (permalink)
chavezeclipse Chuck Nasty Join Date: Nov 2006 Location: md Vehicle: stuff Posts: 3,822	did throttle body bypass __________________ charles whitney aka chuck nasty 2001 eclipse gt: hybrid clutch quiafe lsd custom 3" intake halo projectors evo enkei 17" rims 245/40 g-max 6g74 swap w/UIM/TB tein s tech kyb agx cmf headers poly mounts evo brakes UCS tune custom 2.5" exhaust csf 2 row radiator rear strut bar battery relocated to trunk 22mm rear sway bar ss brake lines nice sound system

08/09/2012, 03:50 PM	#432 (permalink)
drunkoffjuic Aple juic is my beer Join Date: Aug 2006 Location: Antioch, IL Vehicle: 02 GT 3.8L, 07 Jeep GC Posts: 7,315	No anti-seize was used? __________________ Members Ride

08/09/2012, 06:34 PM	#433 (permalink)
Micborth Senior Member Join Date: Jul 2012 Location: Cedar Hill, Tx Vehicle: 2003 Spyder GS Posts: 157	Changed my spark plugs and installed new speakers. Last edited by Micborth; 08/09/2012 at 06:37 PM.

07/29/2012, 09:52 PM	#423 (permalink)
2003GSspyder Junior Member Join Date: Jul 2012 Location: Jacksonville,FL Vehicle: 2003 Eclipse GS Spyder Posts: 1	I drove my spyder to the beach, and of course I always get compliments Sent from my SAMSUNG-SGH-I997 using AutoGuide.Com Free App

07/31/2012, 12:09 AM	#424 (permalink)
fast gt Senior Member Join Date: Feb 2009 Posts: 313	I Changed my drive belt Sent from my N860 using AutoGuide.Com Free App

07/31/2012, 02:53 AM	#425 (permalink)
NOZER Junior Member Join Date: Mar 2012 Location: Los Angeles, California Vehicle: 2001 Eclipse GT Posts: 6	Installed 2 10 inch subwoofers

07/31/2012, 06:03 AM	#426 (permalink)
branden3g Senior Member Join Date: May 2012 Location: San Bernardino,CA Vehicle: 03' GT 5spd Posts: 127	I removed the tint and then gave up when I got to the spotted part on the rear window..then went back only to remove everything inside except for dash, center console, and driver seat...STUPID window..smh

07/31/2012, 05:10 PM	#429 (permalink)
Treyzian G-Force Junkie Join Date: Mar 2012 Location: California Vehicle: 03 GTS Posts: 577	It's an evo steering wheel... and I don't even want to bother to find when the quoted post was from...

08/09/2012, 11:17 AM	#431 (permalink)
3G Runner USN Join Date: Oct 2009 Location: Naples, Italy Vehicle: 2004 Eclipse RS Posts: 782	I have read many people recommending Moog endlinks time and time again on this site, and let me tell you, if you have to use a hacksaw to get them bitched off, have fun. I tightened them down to 29ft/lbs, what it says to on the paper that comes with them, and somehow the nut almost came off but seized at the end. At that point, it was impossible for me to get it off, almost rounded off the inner nut. So took a hacksaw, and went at it. A shorter hacksaw probably would have made it easier(or a dremel, or a sawzall), but I eventually just took the damn blade off because there wasn't a lot of room in there. I am replacing both with another set of Moog endlinks because they are beefier then OEM endlinks. Not necessarily easier to take off. My old OEM ones came off without a hitch.

08/09/2012, 07:10 PM	#434 (permalink)
ADRIENNE Senior Member Join Date: Dec 2011 Location: North New Jersey Vehicle: 2002 Eclipse GS Posts: 696	Washed the car. Then it downpoured...

08/09/2012, 08:07 PM	#437 (permalink)
Daboss254 Senior Member Join Date: Jan 2007 Location: Killeen, Tx Vehicle: 2000 Eclipse V6 Posts: 412	On the home stretch with my Built 6g74 motor swap. Just waiting for TB and exhaust piping gaskets. I also need to hook up vacuum lines and such.

08/09/2012, 08:40 PM	#438 (permalink)
drunkoffjuic Aple juic is my beer Join Date: Aug 2006 Location: Antioch, IL Vehicle: 02 GT 3.8L, 07 Jeep GC Posts: 7,315	I walked past it today on my way through the garage Does that count? __________________ Members Ride

08/10/2012, 10:13 AM	#444 (permalink)
MSP3G Senior Member Join Date: Jul 2011 Location: Twin Cities, Minnesota Vehicle: 2001 Eclipse GT Posts: 390	Forget the speakers, why is there a razor scooter back there?! I have been spending the last two days replacing the front sway bars, nite-shadding the rear corner lights and third brake light. What I have learned: 1. Whoever designed the bracket placement for the front sway bars is a douchbag. 2. Nite-shade is a fickle mistress and clear coat is a bitch when you screw it up once. =/

08/11/2012, 08:21 PM	#452 (permalink)
drunkoffjuic Aple juic is my beer Join Date: Aug 2006 Location: Antioch, IL Vehicle: 02 GT 3.8L, 07 Jeep GC Posts: 7,315	Zaino Wash, clay bar, waxed the car. Photos to come. __________________ Members Ride

08/11/2012, 09:31 PM	#453 (permalink)
SvenHoek "S" Car...Gooooooo Join Date: Jun 2009 Location: Calgary Vehicle: 03 GT-T Posts: 1,173	Registered it for another car show and then went on an organized "downtown cruise" last night. Today it was the 7 hour long Show'n'Shine, then drove it 3 hours back home so that I can do it again tomorrow in another city.

08/11/2012, 10:38 PM	#456 (permalink)
Got Rice Boy Senior Member Join Date: Jan 2010 Location: Washington Vehicle: 2001 Eclipse GS Posts: 3,662	Got some trunk space back. From this: To this: Not 'show car' quality work, but definitely gives me some room for the near future. __________________

08/11/2012, 10:42 PM	#457 (permalink)
grfft3r Photoshopper Join Date: Feb 2011 Location: Land of the Ricing Son Vehicle: 2001 Black Eclipse GT Posts: 3,016	^^^^ Whoa nice!

08/11/2012, 10:59 PM	#458 (permalink)
Red Sun Bishop of Rice Join Date: Oct 2011 Location: Santa Maria, CA Vehicle: Gallo 12>Gallo 24 Posts: 1,153	Nice audio setup

08/13/2012, 04:17 AM	#459 (permalink)
MyShadow AWD NOW! Join Date: Nov 2007 Location: Russia - Moscow Vehicle: 2001 Eclipse GTX Posts: 94	Done some carbon wrap:

08/14/2012, 05:25 PM	#460 (permalink)
ADRIENNE Senior Member Join Date: Dec 2011 Location: North New Jersey Vehicle: 2002 Eclipse GS Posts: 696	Finally got around to getting the car to the shop and finished my parking sensor install This is them on. The parking sensors go on when I put it in reverse. The power comes from the reverse light wires. Heres a close up of the parking sensor. This is the "brain". It hooks of the monitor to all the sensors and power. And finally here is the parking sensor. It tells you how far you are in meters. And then to what side the object is.

08/14/2012, 06:02 PM	#461 (permalink)
neil12011 You cryin' boy? Join Date: Apr 2010 Location: McDonough GA Vehicle: 03' GTS Spyder Posts: 363	Door panel strip Attached Thumbnails

08/14/2012, 06:04 PM	#462 (permalink)
ADRIENNE Senior Member Join Date: Dec 2011 Location: North New Jersey Vehicle: 2002 Eclipse GS Posts: 696	Nice. Is that cf overlay?

08/14/2012, 06:44 PM	#463 (permalink)
neil12011 You cryin' boy? Join Date: Apr 2010 Location: McDonough GA Vehicle: 03' GTS Spyder Posts: 363	It's the vinyl cf stuff you find at autozone, I was actually quite surprised at the quality of it, it's good stuff, was about $12 for a roll. I sprayed a couple of clear coats over it.

08/14/2012, 06:45 PM	#464 (permalink)
neil12011 You cryin' boy? Join Date: Apr 2010 Location: McDonough GA Vehicle: 03' GTS Spyder Posts: 363	Nice job on the parking sensor install, I dig.

08/14/2012, 08:45 PM	#465 (permalink)
ADRIENNE Senior Member Join Date: Dec 2011 Location: North New Jersey Vehicle: 2002 Eclipse GS Posts: 696	Thanks man and I might have to go check out that cf stuff.

08/14/2012, 09:58 PM	#466 (permalink)
neil12011 You cryin' boy? Join Date: Apr 2010 Location: McDonough GA Vehicle: 03' GTS Spyder Posts: 363	Use a heat gun on the curves at the end, you have to stretch it over them, no other way.

08/14/2012, 10:20 PM	#467 (permalink)
ccarrillo717 Protect this house Join Date: Sep 2009 Location: Arizona Vehicle: Yes Posts: 6,328	Haven't drove my eclipse in 16 days been carpooling

08/14/2012, 10:21 PM	#468 (permalink)
drunkoffjuic Aple juic is my beer Join Date: Aug 2006 Location: Antioch, IL Vehicle: 02 GT 3.8L, 07 Jeep GC Posts: 7,315	I looked at it. __________________ Members Ride

08/15/2012, 12:01 AM	#469 (permalink)
branden3g Senior Member Join Date: May 2012 Location: San Bernardino,CA Vehicle: 03' GT 5spd Posts: 127	I did a "stage 1" wire tuck. do_0b in my GT

08/15/2012, 11:44 PM	#470 (permalink)
Ketchup Junior Member Join Date: Apr 2012 Location: Milwaukee, WI Vehicle: 01 Mitsubishi Eclipse GS Posts: 12	Car was staring rough for a good while and then the other morning i got out and it just barely started. Then later in the day i got in my car and it wouldn't turn over. Battery finally died on me. Went and got a new one and it's starting as good as it ever has for me. Also finally replaced my hatch struts. So awesome to have a hatch that doesn't weigh a ton to open and actually stays open!!

08/16/2012, 02:22 AM	#472 (permalink)
branden3g Senior Member Join Date: May 2012 Location: San Bernardino,CA Vehicle: 03' GT 5spd Posts: 127	Stage 1...the hell?? Don't you just mean a "small" wire tuck?[/QUOTE] LOL Hence "stage 1" take a chill pill bro, obviously you know what I was talking about. do_0b in my GT

08/16/2012, 09:43 AM	#475 (permalink)
3G Runner USN Join Date: Oct 2009 Location: Naples, Italy Vehicle: 2004 Eclipse RS Posts: 782	Got tired of having the front on jack stands while waiting for hardware to finish it. Decided to take the front down and swap my rear coilovers. Everything went well with that.

08/16/2012, 10:14 PM	#476 (permalink)
ADRIENNE Senior Member Join Date: Dec 2011 Location: North New Jersey Vehicle: 2002 Eclipse GS Posts: 696	Tried to figure out how to fix this..