immobolizer delete - Club3G Forum : Mitsubishi Eclipse 3G Forums
Go Back   Club3G Forum : Mitsubishi Eclipse 3G Forums > Performance & Tech Forums > 3G Eclipse RS/GS Specific
Club3G Decals

Club3G.com is the premier Mitsubishi Eclipse Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools
Old 06/19/2008, 09:54 AM   #1 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
immobolizer delete

other than the flashing of the ecu to remove the immobolizer, is there any other work arounds anyone has come up with?

Thanks!!
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06/19/2008, 10:07 AM   #2 (permalink)
Just Married 05-15
 
LogicGate's Avatar
 

Join Date: Jan 2006
Location: Orlando, FL
Vehicle: 2001 Eclipse GT Spyder
Posts: 1,754
LogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okay
Send a message via MSN to LogicGate
Quote:
Originally Posted by zeeshan View Post
other than the flashing of the ecu to remove the immobolizer, is there any other work arounds anyone has come up with?

Thanks!!
There is a small unit box that its sold by a few companies (example Viper) that you can use to bypass the immobilizer. I've never tried it, but I have seen it working for remote engine start and engine start button.
LogicGate is offline   Reply With Quote Quick reply to this message
Old 06/19/2008, 10:43 AM   #3 (permalink)
GS-Turbooo
 
CloudINC00's Avatar
 

Join Date: Sep 2005
Location: Jacksonville, FL
Vehicle: 2003 Eclipse GS-T
Posts: 2,440
CloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends here
Quote:
Originally Posted by LogicGate View Post
There is a small unit box that its sold by a few companies (example Viper) that you can use to bypass the immobilizer. I've never tried it, but I have seen it working for remote engine start and engine start button.
I've seen it. The version I had, you had to sacrifice a key (I had it for my remote start, but its gone now). You would put a spare key into the unit and leave it inside the car wired up to your ignition. It would "Replicate" the signals produced by the key and let the car start (You would have to wrap the ignition with a single wire that acted like an antenna). They have other ones that store the key's signals so that you don't have to leave the key in the car.
__________________
[ 2003 GS-T | 2001 GS-T Spyder ]
CloudINC00 is offline   Reply With Quote Quick reply to this message
Old 06/20/2008, 09:34 AM   #4 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
how much was the box?
if its too much i think ill just get slava to flash it for me
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 06/20/2008, 09:56 AM   #5 (permalink)
Senior Member
 

Join Date: Oct 2006
Location: Long Island, NY
Vehicle: 2000 Eclipse GT
Posts: 1,944
00TampaBlueGT seems to be okay00TampaBlueGT seems to be okay00TampaBlueGT seems to be okay00TampaBlueGT seems to be okay00TampaBlueGT seems to be okay00TampaBlueGT seems to be okay00TampaBlueGT seems to be okay00TampaBlueGT seems to be okay
Send a message via AIM to 00TampaBlueGT
I have it in mine now actually for my remote start I think it was $30. The one I have is from Prestige.
00TampaBlueGT is offline   Reply With Quote Quick reply to this message
Old 06/20/2008, 10:34 AM   #6 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
I have one too, but I'm going to have to delete the immobilizer anyway, since I'm running an EVO ECU.

I did have to sacrifice a key.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 06/27/2008, 06:17 PM   #7 (permalink)
Junior Member
 

Join Date: Jan 2007
Posts: 18
benpgreen : who are you?
You can change the ecu perephery values to get rid of the wastegate solenoid and fuel sensor/relay trouble codes we get from the ECU swap. I saw it over on evom and have been driving for a week now and no codes.

Perephery 0 = 56D2
Perephery 1 = 0009
Perephery 2 = 4DDF
Perephery 3 = C0C0

This also disables EGR functions, evap. emissions functions, and immobilizer.

Last edited by benpgreen; 06/27/2008 at 06:19 PM.
benpgreen is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 02:29 PM   #8 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
ok ibought the cable im going to try these asap the cable comes in
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 03:15 PM   #9 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
I just uploaded those periphery values listed above, and it worked!
Here is a screenshot of the emissions checks..... Now the catalytic converter won't pass until I can actually drive, and not just idle there in the parking lot. But here you go



before I uploaded these values I had the wastegate, fuel pressure, and another SES, I think the last one was p0090 or something like that. Anyway, it doesn't matter as they are gone! I guess there is no point of posting that screen, because it is just blank anyway.


*note* just realized that I posted the the wrong screen, this is the OBDII emission check screen, but the other screen that checks for the MIL light was blank anyway.

Last edited by steadly2004; 07/07/2008 at 03:20 PM.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 05:11 PM   #10 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
did the immoblizer option work?
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 05:22 PM   #11 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
did the immoblizer option work?
yup, actually I already had that one figured out, but that was the only value that I had.

Do you already have the periphery lines added into your XML file? Without it you won't be able to see/change the values
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 05:30 PM   #12 (permalink)
Banned
 

Join Date: Feb 2007
Location: Poughkeepsie, New York
Vehicle: 04 GS Silver sporty
Posts: 4,408
04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here
Send a message via AIM to 04gsNA
if my immob says FFFF does that mean its deleted? where do these codes go?
04gsNA is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 05:42 PM   #13 (permalink)
GS-Turbooo
 
CloudINC00's Avatar
 

Join Date: Sep 2005
Location: Jacksonville, FL
Vehicle: 2003 Eclipse GS-T
Posts: 2,440
CloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends here
No, most flashers change their code to FFFF to protect their own code when they post their ROMs on the internet.
__________________
[ 2003 GS-T | 2001 GS-T Spyder ]
CloudINC00 is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 05:51 PM   #14 (permalink)
Banned
 

Join Date: Feb 2007
Location: Poughkeepsie, New York
Vehicle: 04 GS Silver sporty
Posts: 4,408
04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here
Send a message via AIM to 04gsNA
Quote:
Originally Posted by CloudINC00 View Post
No, most flashers change their code to FFFF to protect their own code when they post their ROMs on the internet.
dammit, could you check to see if my ROM has no immobilizer? I was told it does not.
04gsNA is offline   Reply With Quote Quick reply to this message
Old 07/07/2008, 06:24 PM   #15 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by 04gsNA View Post
dammit, could you check to see if my ROM has no immobilizer? I was told it does not.
well, you have to add the lines to the end of the XML to be able to view/edit the periphery. You will then see them when you re-open ECUflash, and be able to change the values.

To do this you need to have an XML editor. ALso, you need to know the ROM ID, and find the specific rom ID's corrosponding XML file, or the base file for that ROM. Then you edit that, adding

Quote:
damn it, when I post the lines, they go invisible.....PM me if you want the code, or just read the thread I have linked
Also, when you're changing the values, I believe you need to add 0x before it, so ecuflash knows to change the values into hex or something like that. (I really don't know the reason why)


Here is a great discussion and the origin of finding the periphery (as far as I know)

http://www.aktivematrix.com/forum/vi...ight=periphery

Last edited by steadly2004; 07/07/2008 at 06:27 PM.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/08/2008, 01:25 AM   #16 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
youre gonna have to help me steadly! i hope i get this ecu flash cable soon. the stupid immoblizer is the only reason my car wont even power up the fuel pump
grr
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/08/2008, 01:38 AM   #17 (permalink)
Banned
 

Join Date: Feb 2007
Location: Poughkeepsie, New York
Vehicle: 04 GS Silver sporty
Posts: 4,408
04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here04gsNA has a few friends here
Send a message via AIM to 04gsNA
Quote:
Originally Posted by zeeshan View Post
youre gonna have to help me steadly! i hope i get this ecu flash cable soon. the stupid immoblizer is the only reason my car wont even power up the fuel pump
grr
send me your ROM and Ill do it for you. My fuel pump powered on when I had the immobilizer?
04gsNA is offline   Reply With Quote Quick reply to this message
Old 07/08/2008, 10:26 AM   #18 (permalink)
GS-Turbooo
 
CloudINC00's Avatar
 

Join Date: Sep 2005
Location: Jacksonville, FL
Vehicle: 2003 Eclipse GS-T
Posts: 2,440
CloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends here
From my understanding, when the immobilizer code doesn't match the key, the car still starts and runs for a few seconds then shuts off. After shut-off, the dreaded green flashing key appears on the gauge cluster...

if your fuel pump doesn't even turn on, then it may be something else besides the immobilizer.
__________________
[ 2003 GS-T | 2001 GS-T Spyder ]
CloudINC00 is offline   Reply With Quote Quick reply to this message
Old 07/08/2008, 11:49 AM   #19 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
from the fsm:

"The immobilizer system consists of the ignition key,
the key ring antenna, the immobilizer-ECU, and the
ECM or PCM . The ignition key has a
built-in transponder. The key ring antenna is installed
on the steering lock key cylinder. Only the registered
ignition key permits the engine to start, therefore, the
engine can never be started by means of a forged
key or by connecting the ignition wiring directly. The
system is significantly safe and reliable against theft.
In addition, the driver has only to turn the ignition
switch to the "ON" position to activate the immobi-
lizer system. If the requirements for starting the
engine are not satisfied, the engine will be immobi-
lized. If a registered ignition key is lost, all your igni-
tion keys need to be registered again using scan tool
MB991502 (MUT-II) to ensure security (refer to
P.54A-28.). An additional ignition key can be regis-
tered as follows (only if no ignition keys are lost):"


according to these, the immobilizer activates asap its on the on position..

you guys sure?? my immobilizer unit and key match, however ecu is not matching right now..
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!

Last edited by zeeshan; 07/08/2008 at 11:54 AM.
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/08/2008, 12:59 PM   #20 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
youre gonna have to help me steadly! i hope i get this ecu flash cable soon. the stupid immoblizer is the only reason my car wont even power up the fuel pump
grr
Quote:
Originally Posted by 04gsNA View Post
send me your ROM and Ill do it for you. My fuel pump powered on when I had the immobilizer?
Either way, I would prefer to teach somebody, so that they may pass the knowledge on in the future.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/08/2008, 08:33 PM   #21 (permalink)
Just Married 05-15
 
LogicGate's Avatar
 

Join Date: Jan 2006
Location: Orlando, FL
Vehicle: 2001 Eclipse GT Spyder
Posts: 1,754
LogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okayLogicGate seems to be okay
Send a message via MSN to LogicGate
FFFF = Nothing, its hard to explain but its there just to fill in the empty memory blocks. If you have that, that means you have your immobilizer disabled and the code was removed.
LogicGate is offline   Reply With Quote Quick reply to this message
Old 07/08/2008, 10:36 PM   #22 (permalink)
GS-Turbooo
 
CloudINC00's Avatar
 

Join Date: Sep 2005
Location: Jacksonville, FL
Vehicle: 2003 Eclipse GS-T
Posts: 2,440
CloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends hereCloudINC00 has a few friends here
I'm sure thats what it does because my car was doing that when I would start it without the correct transponder. (Start like normal, shut off over time, flash green key symbol in gauge cluster)

Filling in the code with FFFF could just be a filler for those who do delete their immobilizer, but entering FFFF does not actually delete it... so just because you have that doesn't mean your immobilizer is disabled, it just suggests that.

The case where you do have FFFF but do not have a disabled immobilizer is when you get your ROM from someone else who has changed it to FFFF to protect their own immobilizer code. And why is it HEX FFFF? Isn't 0000 nothing? lol
__________________
[ 2003 GS-T | 2001 GS-T Spyder ]
CloudINC00 is offline   Reply With Quote Quick reply to this message
Old 07/11/2008, 09:33 PM   #23 (permalink)
Kuztom Uzer Tytel
 
Benz01GS's Avatar
 

Join Date: Dec 2006
Location: Columbia, SC
Vehicle: '04 Lancer Evolution RS
Posts: 745
Benz01GS : who are you?Benz01GS : who are you?Benz01GS : who are you?
Send a message via AIM to Benz01GS
Subscribed, and dualy noted.
__________________
My black beauty
2004 Mitsubishi Lancer Evolution VIII GSR in Tarmac Black

Modifications:
- Megan Racing Style Turbo Manifold
- Megan Racing 3" Downpipe
- 3" Test Pipe
- Espilir JGT500 3" Cat-Back
- Exedy Stage 1 HD Clutch
- Exedy Racing Flywheel
- HKS SSQV (Recirculated)
- Greddy Full Auto Timer
- Zeitronix Wideband AFRM with LCD Display
- ECUFlash- Reflashed
- EvoScan
Benz01GS is offline   Reply With Quote Quick reply to this message
Old 07/15/2008, 02:12 PM   #24 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
what do i add to the xml definition file to make this work!!!
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/15/2008, 02:49 PM   #25 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
i tried all of those periphery codes in the definition rommetdata from logicgate.. and i still am throwing a code P0513 which is P0513....Incorrect Immobilizer Key
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/15/2008, 03:12 PM   #26 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
i tried all of those periphery codes in the definition rommetdata from logicgate.. and i still am throwing a code P0513 which is P0513....Incorrect Immobilizer Key
did you put a "0x" before the codes when you entered them?
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/15/2008, 03:15 PM   #27 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
i tried all of those periphery codes in the definition rommetdata from logicgate.. and i still am throwing a code P0513 which is P0513....Incorrect Immobilizer Key
Quote:
Originally Posted by benpgreen View Post
You can change the ecu perephery values to get rid of the wastegate solenoid and fuel sensor/relay trouble codes we get from the ECU swap. I saw it over on evom and have been driving for a week now and no codes.

Perephery 0 = 56D2
Perephery 1 = 0009
Perephery 2 = 4DDF
Perephery 3 = C0C0

This also disables EGR functions, evap. emissions functions, and immobilizer.

after putting the lines in the definition, you need to restart ecuflash and then you can view/edit the codes for each periphery location. You then go into each and enter "0x----" with the dashes being filled in with the provided code above, but don't use the quotation marks
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/15/2008, 10:20 PM   #28 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
i put in the new definitions (using logicgate's xml definitions) -- then restarted ecu flash, then reopened the hex, then entered the codes by clicking the "edit", then "set data", then 0xwhatever
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/16/2008, 05:09 AM   #29 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
i put in the new definitions (using logicgate's xml definitions) -- then restarted ecu flash, then reopened the hex, then entered the codes by clicking the "edit", then "set data", then 0xwhatever
sounds like you did it right.

What ROM are you using?
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/16/2008, 09:50 AM   #30 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
yay flashbluers actually was the guy i sold my ecu to. he just gave me the immobilizer code and it all works now
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/19/2008, 11:46 PM   #31 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
what are you definition files like (the guys who got this working with success.)

i can't seem to get this to work. its annoying me!!
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/20/2008, 12:26 AM   #32 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
what are you definition files like (the guys who got this working with success.)

i can't seem to get this to work. its annoying me!!
hit me up on yahooIM if you have a free minute. I can probably explain it to you easier
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/27/2008, 07:16 PM   #33 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
what are you definition files like (the guys who got this working with success.)

i can't seem to get this to work. its annoying me!!
Quote:
Originally Posted by steadly2004 View Post
hit me up on yahooIM if you have a free minute. I can probably explain it to you easier
Just an update for everybody. We got my ROM working on Zee's car. It flashed in no problem. It appears that the whole periphery thing wasn't working because the definition files were a little screwy for him.

Now its working.


The next step is to switch over to the 94170015 ROM ID, which is supposed to be the same only upgraded and won't throw some code... like p0300 or something like that according to the evolutionm.net. That'll come when I have my car back together and I upgrade to the Tephra's ROM.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 05:36 AM   #34 (permalink)
Junior Member
 

Join Date: Jan 2007
Posts: 18
benpgreen : who are you?
The definition and perephery values are the same for the 94170015 that is the one I am using.
benpgreen is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 11:41 AM   #35 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by benpgreen View Post
The definition and perephery values are the same for the 94170015 that is the one I am using.
Yea from what I understand its pretty much the same rom with minor improvements that Mitsubishi deemed necessary over the years, before the EVO9 of course.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 12:37 PM   #36 (permalink)
turbo? unf unf!
 
zeeshan's Avatar
 

Join Date: May 2004
Location: Hamilton, ON, Canada
Vehicle: fd rx7
Posts: 1,966
zeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okayzeeshan seems to be okay
Send a message via ICQ to zeeshan Send a message via AIM to zeeshan Send a message via MSN to zeeshan Send a message via Yahoo to zeeshan
yea but those periphery values dont work on stock 3g roms
so we made a rom that is based off the 94170015 ecu and interpolated and copied some data from the oem 2003 eclipse rs rom over
__________________
2005 -- 326whp/339wtq 50 trim, stock motor 13.61 @ 108mph
2006 -- 400whp/400wtq 50 trim, built sohc 12.98 @ 114.7mph
2007 -- gt3582r w/ stock motor, 12.84 @ 116.55mph
2008 -- built 4g64 w/ evo 8 head, gt3582r
2009 -- 3g back to stock (daily driver) + 93 fd rx7 gt35r project
2011 -- 93 fd rx7 v8!
zeeshan is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 03:02 PM   #37 (permalink)
Zero Resistance, LLC
 
FlashBlueRS's Avatar
 

Join Date: Jan 2003
Location: Charlotte, NC
Vehicle: 02 DOHC Eclipse RS
Posts: 1,948
FlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends here
I'm currently running your stock rom with all the periphery stuff changed. Just flash the rom I emailed you and change whatever you want.
FlashBlueRS is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 03:44 PM   #38 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by zeeshan View Post
yea but those periphery values dont work on stock 3g roms
so we made a rom that is based off the 94170015 ecu and interpolated and copied some data from the oem 2003 eclipse rs rom over
Quote:
Originally Posted by FlashBlueRS View Post
I'm currently running your stock rom with all the periphery stuff changed. Just flash the rom I emailed you and change whatever you want.
Hey Zee, remember your definition was a little wacky? I bet that was the problem with the stock ROM too.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 03:48 PM   #39 (permalink)
Zero Resistance, LLC
 
FlashBlueRS's Avatar
 

Join Date: Jan 2003
Location: Charlotte, NC
Vehicle: 02 DOHC Eclipse RS
Posts: 1,948
FlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends here
Edit the periphery stuff manually in a hex editor
FlashBlueRS is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 04:15 PM   #40 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by FlashBlueRS View Post
Edit the periphery stuff manually in a hex editor
Thats one way to do it. Not the only way.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 04:32 PM   #41 (permalink)
Zero Resistance, LLC
 
FlashBlueRS's Avatar
 

Join Date: Jan 2003
Location: Charlotte, NC
Vehicle: 02 DOHC Eclipse RS
Posts: 1,948
FlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends here
It's the easiest way and eliminates all of your problems with incorrectly made or "wacky" xml files.
FlashBlueRS is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 04:35 PM   #42 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by FlashBlueRS View Post
It's the easiest way and eliminates all of your problems with incorrectly made or "wacky" xml files.
Not everybody knows how to edit HEX. Yes it eliminates the XML, but then your XML still isn't right. Why not fix the XML if its the problem?

Seriously... how many people on here can be taught to edit an XML quickly? Probably alot more than can be taught to read/edit HEX in the same manner of time. Editing HEX in only better if you know how to do it already, IMO.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 04:48 PM   #43 (permalink)
Zero Resistance, LLC
 
FlashBlueRS's Avatar
 

Join Date: Jan 2003
Location: Charlotte, NC
Vehicle: 02 DOHC Eclipse RS
Posts: 1,948
FlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends hereFlashBlueRS has a few friends here
The same information needed to fix or create an xml parameter is needed to manually edit the parameter. If you are having problems getting things to work, ditch the dumbed down user interface and try to correct the problem manually. Then you can see if the problem is the rom or an incorrect xml file.
FlashBlueRS is offline   Reply With Quote Quick reply to this message
Old 07/28/2008, 09:54 PM   #44 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by FlashBlueRS View Post
The same information needed to fix or create an xml parameter is needed to manually edit the parameter. If you are having problems getting things to work, ditch the dumbed down user interface and try to correct the problem manually. Then you can see if the problem is the rom or an incorrect xml file.
I didn't have problems getting things to work. Zee's was giving him problems, I gave him my definitions and it worked. Not that difficult.

Why don't you give us all a writeup on how to find and edit the parameters manually? Anybody looking to learn could benifit, and also include how to define ROMs, as I assume its all relavent information.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 01/08/2009, 08:40 PM   #45 (permalink)
Senior Member
 
4g64t's Avatar
 

Join Date: Jul 2004
Posts: 573
4g64t : who are you?4g64t : who are you?4g64t : who are you?
nevermind
__________________
Brandon - Fully Built 64/63 Galant

Last edited by 4g64t; 01/08/2009 at 10:23 PM.
4g64t is offline   Reply With Quote Quick reply to this message
Old 02/28/2011, 11:47 AM   #46 (permalink)
ECLIPTO
 
davila825's Avatar
 

Join Date: Sep 2007
Location: Ames, Iowa
Vehicle: 00 eclipse gt
Posts: 2,063
davila825 has a few friends heredavila825 has a few friends heredavila825 has a few friends heredavila825 has a few friends heredavila825 has a few friends heredavila825 has a few friends heredavila825 has a few friends heredavila825 has a few friends heredavila825 has a few friends here
Quote:
Originally Posted by CloudINC00 View Post
I've seen it. The version I had, you had to sacrifice a key (I had it for my remote start, but its gone now). You would put a spare key into the unit and leave it inside the car wired up to your ignition. It would "Replicate" the signals produced by the key and let the car start (You would have to wrap the ignition with a single wire that acted like an antenna). They have other ones that store the key's signals so that you don't have to leave the key in the car.
sorry for bumping an old thread, my question goes with this thread. i have a remote start with one of these immobilizer delete boxes. i am replaceing my ecu and my question is will my immobilizer delete still work? Here is my plan. Replace the ecu. Keep old immobilizer. Get spare key that correlates with the ecu and stick it in the immobilizer delete and it should work right?
davila825 is offline   Reply With Quote Quick reply to this message
Old 03/02/2011, 08:55 AM   #47 (permalink)
Boosted
 
steadly2004's Avatar
 

Join Date: Feb 2007
Location: Lincolnton, NC
Vehicle: Stratus 2.4L
Posts: 3,815
steadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by manysteadly2004 is well-liked by many
Send a message via MSN to steadly2004 Send a message via Yahoo to steadly2004
Quote:
Originally Posted by davila825 View Post
sorry for bumping an old thread, my question goes with this thread. i have a remote start with one of these immobilizer delete boxes. i am replaceing my ecu and my question is will my immobilizer delete still work? Here is my plan. Replace the ecu. Keep old immobilizer. Get spare key that correlates with the ecu and stick it in the immobilizer delete and it should work right?
With the immobilizer deleted in the ECU ROM, you don't need any other box installed to start the car, just a key. The key doesn't have to be a fancy chip key either, just a plain old metal key works. I am pretty sure that the remote start would work without the workaround box with a key inside of it also.

Also, no, the immobilizer in the car has a value that is coded into the ROM. No need for the other key, since you're not moving the physical immobilizer. IF you swap ECU's, read the immobilizer number with ecuflash before physically swapping the ECU, then you'll have to input the code in the new ECU's ROM (if you want to keep the immobilizer and not delete it)

Last edited by steadly2004; 03/02/2011 at 08:57 AM.
steadly2004 is offline   Reply With Quote Quick reply to this message
Old 03/18/2011, 11:17 AM   #48 (permalink)
Junior Member
 

Join Date: Feb 2011
Posts: 18
indcent : who are you?
ok.. i have a 2001 ecu in a 2000 eclipse gs auto the ecu is from an o1 gs auto.. i need to delete the immobilizer in the unit. im very new to this and the open port 2.0 that i bought came with 0 instructions.. ive read up and down the forums and i cant seem to figure out where im going wrong.. when i hook up the port in my car it reads it then says unknown rom image.. i tried to go through with one of the preloaded definitions but it doesnt pop up any charts or anything .. or any options to drop the immobilizer.. i would be willing to send someone a few bucks for some of their time in helping me figure this problem out as im without a car until this is fixed.. thanks so much
indcent is offline   Reply With Quote Quick reply to this message
Old 03/18/2011, 12:00 PM   #49 (permalink)
Senior Member
 

Join Date: May 2010
Location: CT
Vehicle: 2001 GT
Posts: 336
buddd : who are you?buddd : who are you?
Quote:
Originally Posted by indcent View Post
ok.. i have a 2001 ecu in a 2000 eclipse gs auto the ecu is from an o1 gs auto.. i need to delete the immobilizer in the unit. im very new to this and the open port 2.0 that i bought came with 0 instructions.. ive read up and down the forums and i cant seem to figure out where im going wrong.. when i hook up the port in my car it reads it then says unknown rom image.. i tried to go through with one of the preloaded definitions but it doesnt pop up any charts or anything .. or any options to drop the immobilizer.. i would be willing to send someone a few bucks for some of their time in helping me figure this problem out as im without a car until this is fixed.. thanks so much
Learn the ECUs assembly language and do it yourself!! Just kidding. But really, you have to change the ROM to delete the immobilizer. You could probably just pay someone to do it for you. Pharmecis might be able to help you. PM him.
buddd is offline   Reply With Quote Quick reply to this message
Old 03/18/2011, 12:19 PM   #50 (permalink)
Junior Member
 

Join Date: Feb 2011
Posts: 18
indcent : who are you?
ive edited the xml i believe.. changing the phe to 0x000 in a rom i found for a 2001 .. it just wont let me send it to the ecu for some reason.. in fact it wont let me read off of my ecu anymore either.. i dont know what the hell is going on

its reading .. it still wont start.. i changed the immobilizer to 0x010 not sure if that is correct or if i have to find other lines to change.

Last edited by indcent; 03/18/2011 at 12:41 PM.
indcent is offline   Reply With Quote Quick reply to this message
Old 12/03/2013, 09:02 PM   #51 (permalink)
Senior Member
 
branden3g's Avatar
 

Join Date: May 2012
Location: San Bernardino,CA
Vehicle: 03' GT 5spd
Posts: 176
branden3g : who are you?
Sorry to bump an old thread but I recently lost my immobilizer chip and now can't start my car. I don't have a cable and need my car asap. Is there any other way of deleting it without the cable or taking it to the dealer since it won't start.
branden3g is offline   Reply With Quote Quick reply to this message
Old 12/03/2013, 09:11 PM   #52 (permalink)
Senior Member
 
tHEpRINCE-GT's Avatar
 

Join Date: Apr 2013
Posts: 2,033
tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.tHEpRINCE-GT is clearly one sexy bitch.
Quote:
Originally Posted by branden3g View Post
Sorry to bump an old thread but I recently lost my immobilizer chip and now can't start my car. I don't have a cable and need my car asap. Is there any other way of deleting it without the cable or taking it to the dealer since it won't start.
No I'm pretty sure you're up shits creek, unplugging the battery would only reset some of the ecu features like idle and that.
Good luck but I'm pretty sure you're screwed


Sent from AutoGuide.com Free App
tHEpRINCE-GT is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Club3G Forum : Mitsubishi Eclipse 3G Forums > Performance & Tech Forums > 3G Eclipse RS/GS Specific

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Club3G Forum : Mitsubishi Eclipse 3G Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off





All times are GMT -5. The time now is 10:21 AM.
Search Engine Friendly URLs by vBSEO 3.3.0
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.