This is my car and history since i buy

[galacticoa3]

This is the first day whit my 3g GT




dirty motor



and was snowing

[galacticoa3]

FIRST DAY

i put in headlights and fogs with xenon 8K and they polarized windows

[galacticoa3]

second day i install sound



7" jensen touchscreen indash



amp. steelpro 1000rms and two DD35 10"



cap. 2 farh. and epicenter

[galacticoa3]

day 3 i work in the rear bumper because it was loose and install security sistem alarm and radar zone

sorry i don have pictures about

[galacticoa3]

after this tree days i was very happy









so i decide dress at the colors car to took a ride!!!

[Chad]

Shouldn't have put those HID's in factory headlights. You're blinding people on the roads.

[SpyderGirl02]

^

Otherwise, nice work

[galacticoa3]

Thanks, my headlights have a little refractor inside and the lights aré lowest than the fogs, and have in hig light only allogenic. I put moré pictures about my work later

[galacticoa3]

4/04/2012

i change the front lights bumper and led bulbs

[galacticoa3]

5/04/2012

i tuneup my machine
because i had 5.5km/L and the scanner in autozone gave me 2 codes P0421 and P0321

change sparks, filter and wires


















after this tune up i went to autozone again and the results was cero codes!!

[Rusty]

se ve chulo!

[mitsu3g01]

Not bad. Keep it clean.

[KidKobe210]

Originally Posted by galacticoa3

..and install security sistem alarm and radar zone

Tell me more about this radar zone you speak of.

[galacticoa3]

Gracias Rusty!!!
i try to do it mitsu3g01!!!
and KidKobe210 this radar is called to proximity sensor or wave sensor, this sensor take the volumen from your inside car when you alter this volumen the senseor send one pulse to the alarm and soun the prevent tones ( this is one zone ) the secon zone send direct shoot and the warning tones.

the first zone is plug in to the sensor input of the alarm. so if you alarm have shock sensor and not other port you can conect whit one diode ( works like switch in one way) to prevent falses prevent tones

the secon zone is conected to the trip doors ( if your alarm dont have input for 2 zones sensor) , when you leve your sunroof open and somebody get hand into your car the secon zone send the trip direct to warning tones

i hope you stend because i dont now good english
and if you now spanish tellme because is easy to me

[Red Sun]

It looks good, se mira chido, continua el buen trabajo!

[galacticoa3]

Originally Posted by Red Sun

It looks good, se mira chido, continua el buen trabajo!

thanks!!! y a seguir con mas modificaciones que faltan

[galacticoa3]

9/04/2012

when i go out yesterday from my work:

LED LIGHTS




LOW LIGHTS




LOW LIGHTS+FOG`S



HIGH LIGHTS

[galacticoa3]

THIS IS A REBUILT MOUNT REAR AND FRONT!!!!

FIRST I DESARM ALL THAT TO GET ACCESS TO REAR MOUNT

MY TOOL`S






TRANSMISSION MOUNT


AND REAR MOUNT


WHEN I LIFT THE MOTOR TO GET OUT THE REAR MOUNT I SAW THE REAL PROBLEM THE FRONT MOUNT AND IT HAS DAMAGED


SO I DEDIDE STARED WHIT THIS MOUNT SO I UP THE CAR IN TREE POINTS





AND DESARM THIS PART



AND THIS IS THE FRONT MOUNT DAMAGED





AND START RO REBUILT PROCESS
THIS PROCESS WAS FOUNDED IN THE NET MOPAR FOROUS BUT I DONE THE PICTURES AND WORK IN MY HOME

CLEAN THE MOUNT WHIT SOAP



THIS IS THE PRINCIPAL ACTOR!!



MIXED THE BLACK PART AND GREY LIKE PLASTICINE



AND FILL THE MOUNT



ONE HOUR Y GOT THAT



I LUBRICATE ALL BOLTS TO



AND REARM ALL PARTS



THEN START WHIT REAR MOUNT TO





THE DAMAGE WAS MINIMUN SO I JUST PUT A LITTLE PART OF QUICKSTEEL







AND REARM ALL PARTS









I TEST ONLY THE MOTOR MOVES AND REALLY WORKS!!!!!!!!

SO I TEST TOMOROW HOW FEEL THE DRIVE BECAUSE I HAD TO CHANGE ONE MOUNT RIGTH ON MY WIFE CARS TO AND ONE ARM IN A BLETTLE OF MY NEIGHBOR

IF YOU WANT I CAN DO ONE HOW TO.

[galacticoa3]

Today I went with the mechanical and scanning the result was zero 3G codes on the engine and transmission so that the fault is mechanical options available are:
1.-transmission oil change
2.-damaging and complete repair it

so today is expected to tune it and test next week

[galacticoa3]

today i change the bulbs in taillights and put leds bulbs, change wire ground amplifier, and reconfigurate the negative door pulses in the alarm

[lyonstl]

Hey, how often do you see other 3g eclipses in your area? Just curious as to the popularity of them out there.

[galacticoa3]

Originally Posted by lyonstl

Hey, how often do you see other 3g eclipses in your area? Just curious as to the popularity of them out there.

not so often in fact there are few expensive maintenance as almost no one, there is a local club but not where they meet

[Red Sun]

La nueva bateria se mira bueno. Yo tambien necesito una nueva bateria, la mia esta un poco hodida

[galacticoa3]

Originally Posted by Red Sun

La nueva bateria se mira bueno. Yo tambien necesito una nueva bateria, la mia esta un poco hodida

esta buena pero quiero una kinetik u optima para poder darle fuerte al sonido

[KidKobe210]

Let me know how you like that proximity sensor alarm, I want to install one in my Spyder but I haven't read any reviews on it.

[galacticoa3]

Originally Posted by KidKobe210

Let me know how you like that proximity sensor alarm, I want to install one in my Spyder but I haven't read any reviews on it.

ok; give me time to take photos an explain it

[Lil Mitsu]

Originally Posted by galacticoa3

That black metal piece next to your bumper, get some black trim paint or regular flat black krylon paint and spray it. It'll look new and not be noticeably nasty from the gap between the bumper and hood.

[galacticoa3]

Originally Posted by galacticoa3

ok; give me time to take photos an explain it

This is the brand and the one zone sensor (mine have 2 zones)





this is my alarm brain



and the sensor port




in this case ( photos ) only have to conect the sensor in the port,

in my case i had to check the output sensor 1 and 2 because this sensor have 4 wires and two are for + and -

when i found the correct conection i do whit the first zone and the secon zone going to conect at doors input - in the alarm

the port in the alarm give:
+12v
- groun
+5v ( to conect the shoot signal)

take care don't burn the brain checking voltages ( i done )

[galacticoa3]

Originally Posted by Lil Mitsu

That black metal piece next to your bumper, get some black trim paint or regular flat black krylon paint and spray it. It'll look new and not be noticeably nasty from the gap between the bumper and hood.

thank you good advice!!

[galacticoa3]

this is my BIG3 intalation

from alternator to battery



hold wire



in the battery



the other 2 wires in the big 3 ( grounds )



motor ground



battery to ground car, in the back look original 8 gauge ground.



The new fuse to my power acoustik sl5500d comming monday



The power wire to the back seat to my PASL5500D



the old wire 4 gauge used to conect the steelpro 2000.1d

[galacticoa3]

26/04/12
THE LAST UPGRADE

BEFORE




AFTER

[SKitz]

Good clean work so far, that amp made my jaw drop :O

[galacticoa3]

Originally Posted by SKitz

Good clean work so far, that amp made my jaw drop :O

thanks jajaja my jaw drop to when i see!!!

[galacticoa3]

Today I went to the mechanic and change the oil transmison and it has worked well for the rest of the day I hope will be the end of the problems with my transmison

[KidKobe210]

That's a huge amp. I wonder how much it weighs.

[makike]

Se ve muy bien el trabajo que llevas en el carrito, me gustaria mucho escuchar ese sonido, lo unico no se si ya lo hiciste pero seria bueno que pintaras negras las falsas ventilas de la defensa si ayuda mucho... saludos desde Hermosillo! y siguele con el buen trabajo.

[galacticoa3]

Originally Posted by makike

Se ve muy bien el trabajo que llevas en el carrito, me gustaria mucho escuchar ese sonido, lo unico no se si ya lo hiciste pero seria bueno que pintaras negras las falsas ventilas de la defensa si ayuda mucho... saludos desde Hermosillo! y siguele con el buen trabajo.

no lo he hecho que pintura me recomiendas laca normal en negro??

[galacticoa3]

Originally Posted by KidKobe210

That's a huge amp. I wonder how much it weighs.

i don´t now but i fell like 7 or 8 kg

[3g_bishi]

wow nice man keep up good work!

[galacticoa3]

after 3 day´s on chraged i test one optima top yellow an works good






and test the amp.




i need a new enclousure
jajaja

[galacticoa3]

After a few days my prothane kit is Arrived



So i only need cine time to install them

[drunkoffjuic]

I would put a grommet around those lines going through the firewall.

[galacticoa3]

I feel like a kid with a new toy

[galacticoa3]

Originally Posted by drunkoffjuic

I would put a grommet around those lines going through the firewall.

Thanks for the advice !!

[galacticoa3]

sunday in the afternoon :

The neighbor's car ran out of change and went to my car, I bend the bummper and damage the paint

[galacticoa3]

wednesday 16/05/12


remplaced the link bar suspension.

Here in mexico this is the number part and come on left and rigth







first lift the car and loose the wheel



retire the old part with allen and key 14mm (or 11/16)



in my case this is one side



and the other



i recomend you change both at the same time.

this is the bar hole



and the hold on the strut



so you have to reconect the bar with the strut with the new link




i use one hammer to push the bar and match the link in the two holes





and rearm all !!!!





and very important



NEVER LEAVE THE CAMERA TO YOUR WIFE JAJAJA

[galacticoa3]

saturday 26/05/12

finaly i had time to change my motor mount by motor mount prothanes kit

so i took some pictures:

first: always work with safe!!!!

i had to lift my car and soport.



i started whit the front mount disarm again jajaja







if you remember i rebuilt my motor mount rear an front



so i need to crash all te mount













when i got the motor mount disarm i had to check the kit and mark the mounts



then install the correct remplace in the mount i use tranny fluid to insert the mount



and rearm







then i continued whit the tranny and rear suport

so i had to desarm the battery and the base to



and demount the two mounts



the rear:









and install the prothane



desarm the tanny mount




in my case the trynny mount had damaged




well desarm to






and insert the new



rearm!!!





in this picture i took the tree mount front, rear and trinny.




and the last mount:

remove the water tank and the link bar whit the motor and mount





in this side the damage was worse



like the others desarm and install the new mount



and finished

[grfft3r]

Great job. Doing those are a pain. Glad it worked out for you.

[galacticoa3]

30/05/12

i got my new car stereo,rear camera,cover stereo face and kenetik battery







before:



after:






before



after



i install one sony amplifier under the passanger seat 4 channel to my speakers



and i had to remove the epicenter under the driver seat



more pictures













WHEN I FINISH I PLAY SOME MUSIC AND THAT WAS THE RESULT
MY WINDSHIELD CRASHED!!!

[galacticoa3]

Originally Posted by grfft3r

Great job. Doing those are a pain. Glad it worked out for you.

thanks for the coment, and it is was, in fact i had to rest all the next day

[ccarrillo717]

Holy pics I could do without the fogs but clean nonetheless

[galacticoa3]

Originally Posted by ccarrillo717

Holy pics I could do without the fogs but clean nonetheless

in fact i think in one change in the fogs because one of them are broken, i think in use the grill, or even change the bumper to upgrade 2003-05

[galacticoa3]

9/06/12
update i got that in ebay



so i installed





unplug the wire MAF



get the housing filter






get the MAF



install the filter adapter



plug the filter whit the MAF



install the mount



and finished!!

[galacticoa3]

those are my news headrest







only need time to install them.

[galacticoa3]

other hard work

my car had a noise in the rear suspension, i was thinking were the rear amortiguadores.
before change i look down in the rear side seek the catalyzer because i got CEL and one of them was P0421 so i look down seek the catalyst and i hold the rear stabilizer bar and the links were damaged. so i remplace them.

here is some pics about it.


part number





tools



start the work













and the noise was gone

[mwessinger]

Fantastic job! It is looking really good. You have put a lot of work into it and are going to have a great ride.

[galacticoa3]

Originally Posted by mwessinger

Fantastic job! It is looking really good. You have put a lot of work into it and are going to have a great ride.

I hope that!!because here in Mexico are dificult to get some parts. in fact i have a CEL P0403 and the solenoid comes in 10 days.

thanks for you post.

[NFSEclipseGT]

Led hood lights, sound system components everywhere, and non-matching ghetto brands for almost every component (not to mention) do not a good car make. I am sorry man, but I can't give you much for this. It doesn't float my boat. With as much as you seem to be able to be capable of doing, why can't you clean that up a tad? I would feel so shitty about my car if I knew that it had all of that crap just screwed into the back of my back-seat.

[galacticoa3]

Originally Posted by NFSEclipseGT

Led hood lights, sound system components everywhere, and non-matching ghetto brands for almost every component (not to mention) do not a good car make. I am sorry man, but I can't give you much for this. It doesn't float my boat. With as much as you seem to be able to be capable of doing, why can't you clean that up a tad? I would feel so shitty about my car if I knew that it had all of that crap just screwed into the back of my back-seat.

No entiendo muchas de las cosas que dices pero si no te gusta no me interesa Yo hago lo que puedo con lo que tengo a mi alcance económico porque acá es mas difícil y caro conseguir las cosas para poner marcas.

[galacticoa3]

today i can install my monitor`s