The ICE MAN Cometh! - Page 6

ICEMAN99TURBO · 10/28/2009, 09:32 PM

Quote:

Originally Posted by Steveodotcom1

Hmmm, innovate, interesting to see that you've gone away from the popular UEGO.

Is that CD in the box used for logging I'm assuming?

It is the program for the Laptop, but I already have the LC-1 so it has already been installed.

Special_K · 10/28/2009, 09:37 PM

Quote:

Originally Posted by Steveodotcom1

Hmmm, innovate, interesting to see that you've gone away from the popular UEGO.

Is that CD in the box used for logging I'm assuming?

IMO the UEGO sucks. I am not a big fan of it at all. That being said, the CD has the Innovate software on it. There are some programs in there for datalogging and also you can get a big ass gauge on your screen if you want. Innovate makes some very nice products, although they arent cheap.

ICEMAN99TURBO · 10/28/2009, 09:41 PM

Quote:

Originally Posted by Special_K

IMO the UEGO sucks. I am not a big fan of it at all. That being said, the CD has the Innovate software on it. There are some programs in there for datalogging and also you can get a big ass gauge on your screen if you want. Innovate makes some very nice products, although they arent cheap.

As long as they do what they are supposta, then they are worth every penny. I picked it up for $229.00 Shipped.

Steveodotcom1 · 10/28/2009, 09:48 PM

Quote:

Originally Posted by Special_K

IMO the UEGO sucks. I am not a big fan of it at all. That being said, the CD has the Innovate software on it. There are some programs in there for datalogging and also you can get a big ass gauge on your screen if you want. Innovate makes some very nice products, although they arent cheap.

I don't think the gauge it's self "sucks" but I am a little disappointed you have to figure out for yourself how to datalog; although on the bright side, it gives you freedom to use a third party program such as EvoScan to log with from what I've heard.

I purchased my UEGO from a local who sold it to me brand new for $150, but brand new I believe they go for around $200 depending on who you order through.

ICEMAN99TURBO · 11/25/2009, 03:20 PM

The front bank... Better than when I first got them!

Well, I finally got a chance to get under the car and get my down pipe off and welded as well....Loverly welds are all cracked or breaking.

So I just had the down pip finished... beautiful.

Inside...

Apon installing I thought everything was good....WRONG! Found a bit of light coming from, you guessed it, the rear bank. Well, I might as well get it done as well. You can see where the crack is and how I taped it to keep the correct position of the holes.

Here is the new Clock pod I just has cleared as well... Ooooo Pretty.

...the CF work was done by another member but I did the clearing.

Here is the one I had in the car for years and as you can tell the material is pulling away from the piece and is cracking...Not sure what I am going to do with it.

A picture of my radio bezel after a fresh coat of clear, just doing a little wet sanding and buffing to really make her shine.

WorldWind · 11/25/2009, 04:22 PM

Looks very nice!!

For fun I just went back over the whole thread... once again very impressed.

Clipse3GS · 11/25/2009, 04:58 PM

I see Jeremy even works on his car in the gloves

03Quicksilver3G · 11/25/2009, 05:22 PM

Quote:

Originally Posted by WorldWind

Looks very nice!!

smackalan · 11/26/2009, 12:22 AM

Always was a fan Jeremy.

catch-me · 11/26/2009, 10:37 AM

I'm still suprized those welds on the headers are cracking like that. At lease you don't need to drive it around sounding like a truck any more

ICEMAN99TURBO · 11/26/2009, 02:52 PM

Quote:

Originally Posted by catch-me

I'm still suprized those welds on the headers are cracking like that. At lease you don't need to drive it around sounding like a truck any more

Well, the welds yes, but the flanges were what the big problem was, they were just failing. So now since they will be welded I hope they will be a lot better...not to mention stronger as well.

Bitter · 11/26/2009, 06:08 PM

Quote:

Originally Posted by ICEMAN99TURBO

Well, the welds yes, but the flanges were what the big problem was, they were just failing. So now since they will be welded I hope they will be a lot better...not to mention stronger as well.

what supports that mid pipe between the two banks? just the flanges? may not hurt to design some kind of bracket to weld to them that holds them to the engine or trans.

ICEMAN99TURBO · 11/26/2009, 07:01 PM

Quote:

Originally Posted by Bitter

what supports that mid pipe between the two banks? just the flanges? may not hurt to design some kind of bracket to weld to them that holds them to the engine or trans.

Yea, just the mid/flex pipe. The rest of it has brackets that are welded to the pipe a 6/7" from from cat back portion of the exhaust.

ICEMAN99TURBO · 12/10/2009, 10:28 PM

Got my dash pieces all done and looking pretty and my rear bank is all welded up, ready to go on!

Now I'm just waiting on my gauge pod and my new oil temp gauge....guess what is next.

fast gt · 12/10/2009, 10:33 PM

very nice ive always liked ur car

05eclipse05 · 12/11/2009, 12:47 AM

Jeremy, your car makes my southern region head north.

ICEMAN99TURBO · 12/11/2009, 10:47 AM

Was going to go to work today, but it is so windy and cold that it would be just a huge fight..

So I went to the coffee shop and visited some of the older guys.

Came home and much to my surprise....

Had to test the new A/F to see how it would fit. Due to the shallow back I couldn't put it where narrow one is now, so I had to step up.

Here is what is going in place of the narrow band A/F....Kind of see what is going to happen this winter?

Bitter · 12/11/2009, 07:21 PM

need oil pressure too.

ICEMAN99TURBO · 12/12/2009, 08:38 AM

Quote:

Originally Posted by Bitter

need oil pressure too.

I've had that gauge man ever since I bought the car. It's in the vent above the radio bezel.

Pace187 · 12/12/2009, 09:37 AM

it would drive me nuts not having heat come out of those vents

ICEMAN99TURBO · 12/13/2009, 02:01 PM

Quote:

Originally Posted by Pace187

it would drive me nuts not having heat come out of those vents

Oh, no worries, that car heats up good enough without the help from them vents.

Bitter · 12/13/2009, 02:10 PM

Quote:

Originally Posted by ICEMAN99TURBO

I've had that gauge man ever since I bought the car. It's in the vent above the radio bezel.

i guess i was too busy holding on for dear life that i didn't notice.

ICEMAN99TURBO · 12/13/2009, 02:37 PM

Quote:

Originally Posted by Bitter

i guess i was too busy holding on for dear life that i didn't notice.

You rode in my car.....When?

Bitter · 12/13/2009, 02:45 PM

Quote:

Originally Posted by ICEMAN99TURBO

You rode in my car.....When?

we went to go get some meat.

Special_K · 12/14/2009, 02:10 PM

Quote:

Originally Posted by Bitter

we went to go get some meat.

Sounds about right, you two in a 3g going to get meat!!!

05eclipse05 · 12/14/2009, 06:48 PM

It's not a race, It's a rally

EZT · 12/14/2009, 06:55 PM

That radio bezel and clock pod look great. And the gauges there are very nice. One day I hope to add some necessary gauges, probably on a triple gauge pillar though.

ICEMAN99TURBO · 12/14/2009, 07:12 PM

Quote:

Originally Posted by EZT

That radio bezel and clock pod look great. And the gauges there are very nice. One day I hope to add some necessary gauges, probably on a triple gauge pillar though.

To me I hate dummy lights, so the 2 gauges and the CIA were my first mods done to my car. If I were you, I would be putting them on your Christmas list for Santa.

EZT · 12/14/2009, 07:14 PM

Quote:

Originally Posted by ICEMAN99TURBO

To me I hate dummy lights, so the 2 gauges and the CIA were my first mods done to my car. If I were you, I would be putting them on your Christmas list for Santa.

Do you got any pictures of those particular ones at night because I won't lie you have me interested. These are on my list for the future, but not my x-mas list unfortunately

ICEMAN99TURBO · 12/14/2009, 07:35 PM

Quote:

Originally Posted by EZT

Do you got any pictures of those particular ones at night because I won't lie you have me interested. These are on my list for the future, but not my x-mas list unfortunately

No, I could but everything is still apart, I can get you some in a bit though.

Special_K · 12/14/2009, 07:48 PM

Quote:

Originally Posted by ICEMAN99TURBO

No, I could but everything is still apart, I can get you some in a bit though.

Do eet nowa

ICEMAN99TURBO · 12/24/2009, 03:37 PM

Progress from last weekend, going to get back out to the shop in a little bit to try my new O2 bung that just came in from Summit.

Here are some pics...

The 3G...apart.

Wiring up the wideband and the oil temp gauges.

Wideband installed

Not that bad if I do say so myself. :snap:

ICEMAN99TURBO · 12/24/2009, 07:42 PM

Update...

Rubber gromit worked like a glove, just had to grind the hole out a bit more to make it work; it seals tight and works good. Did a "free-air" calerbration on the LC-1 and re installed that, fired her up and the new wideband works cat's ass!

Now all I have to do is get the light wire installed for the oil temp and that gauge can be installed.

...And yes, I worked on my car on Christmas Eve.

I wanted to get it done to see how it looked and I am very happy with the results.....now it is time for a drink and visit with the family. Merry Christmas everyone!

Black_out · 12/24/2009, 08:02 PM

What's the red switch by your foglights for?

Gauges look nice, glad to see it's coming along for you!

I worked on my car today as well. Only mine involved taking off the intake manifold and puttig it back on.

Chicago3g · 12/26/2009, 12:42 AM

one of the CLEANIEST 3gs wat kind of wheels are thos

Chippy · 12/26/2009, 09:32 AM

Quote:

Originally Posted by Bitter

i guess i was too busy holding on for dear life that i didn't notice.

Since when is Jeremy's car fast???

Looking good man...

Bitter · 12/26/2009, 10:46 AM

Quote:

Originally Posted by Chippy

Since when is Jeremy's car fast???

Looking good man...

fast? maybe not. reliably not broken? always.

ICEMAN99TURBO · 12/26/2009, 01:02 PM

Quote:

Originally Posted by Black_out

What's the red switch by your foglights for?

Gauges look nice, glad to see it's coming along for you!

I worked on my car today as well. Only mine involved taking off the intake manifold and puttig it back on.

The button is for recalabrating the LC-1, like a manual reset. Thank you.

Quote:

Originally Posted by Chippy

Since when is Jeremy's car fast???

Looking good man...

Thanks bud, hope you and the wife had a good Christmas

Miss you 2.

ICEMAN99TURBO · 01/01/2010, 08:51 PM

Quote:

Originally Posted by Chicago3g

one of the CLEANIEST 3gs wat kind of wheels are thos

Enkei RSVs.....The 18" are discontinued.

iam2fast4u · 01/02/2010, 03:18 AM

Quote:

Originally Posted by ICEMAN99TURBO

Enkei RSVs.....The 18" are discontinued.

I must admit it to you, your 3g is my inspiration. I llove those wheels, Ive been searching and searching for something that looks like them, because Im looking for a black with chrome/polished lip but I dont want a five spoke. I would love some like yours but copying is no fun. Lemme know if you ever want to sell those

Your wheels look great. Ad if I understood correctly didnt you buy the silver RSVs and just paint the spokes black?

ICEMAN99TURBO · 01/02/2010, 09:29 AM

..Everything is for sale my friend, as long as the price is right.

Quote:

Originally Posted by iam2fast4u

Ad if I understood correctly didnt you buy the silver RSVs and just paint the spokes black?

Correct, I bought the Gunmetal Gloss, nothing was ever painted or touched. I just washed them and threw them on.

Now what I was told, is since the Gunmetal (18x7) are gone; if I ever had a issue and needed a wheel I got get a Bronze one and have it powder coated... Not sure if I would do that but I don't know.

iam2fast4u · 01/02/2010, 01:44 PM

Haha and what might that price be?

How much did it cost to have all four painted? Are they powdercoated?

But arent all the three colors the same, just painted spokes and part of the lip? TEchnically you could paint any of the three black and they would turn out the same, and actually I think I saw some gunmetal ones on NEXT's website

I will look again and look for a link and post it up

Edit: enkei rsv gunmetal gloss Wheel Rim at WheelsNext.com

ICEMAN99TURBO · 01/02/2010, 03:02 PM

Quote:

Originally Posted by iam2fast4u

Haha and what might that price be?

How much did it cost to have all four painted? Are they powdercoated?

But arent all the three colors the same, just painted spokes and part of the lip? TEchnically you could paint any of the three black and they would turn out the same, and actually I think I saw some gunmetal ones on NEXT's website

I will look again and look for a link and post it up

Edit: enkei rsv gunmetal gloss Wheel Rim at WheelsNext.com

I couldn't tell you since I am unsure on what I would replace them with. As far as the link, they might be on there, but they might not have the 18" size. I have a small ding in one of mine and I was going order an extra to have, but I was reluctant in my search to find one and was told they are discontinued.

ICEMAN99TURBO · 01/17/2010, 05:11 PM

A few months ago I sent some pictures to MMNA for a contest they are putting on to showcase your car at one of the many Auto Shows for North America.

Well, lets just say I am in the final 3 to have the car showcased at the 2010 Chicago Auto Show!

Here is the link to vote, thank you all from the bottom of my heart.

The AutoShowoffContest: Voting

Here are the others I am up against...

Looks like a 3G, but..... honestly no where close to something I would want representing my company.

and...

3000GT SL ...Not a VR4???

wright06jhs · 01/17/2010, 05:53 PM

voted for you.

03Quicksilver3G · 01/18/2010, 12:55 AM

Voted for you, hope you win

NiteRyd · 01/23/2010, 11:31 AM

So the winner was annouced yesterday, was it you Jer?

ICEMAN99TURBO · 01/23/2010, 02:28 PM

No one knows yet.. nothing has been stated, shown, or announced.

Jabber · 01/23/2010, 02:46 PM

WTF Jer! Get on the ball and start calling people. I need to know if I should bring the california duster for your car or the flamethrower for the other ones.

ICEMAN99TURBO · 01/23/2010, 02:58 PM

Quote:

Originally Posted by Jabber

WTF Jer! Get on the ball and start calling people. I need to know if I should bring the california duster for your car or the flamethrower for the other ones.

I love you...

I'm sure that if I made a call today I wouldn't get anyone. I should call ED, but I'm sure he is going to be like the rest of us, just up in the air. I don't really know what else to do other than wait.

ICEMAN99TURBO · 01/25/2010, 08:29 PM

Quote:

Originally Posted by MitsubishiCars.com

Congratulations to this year's winner of the Chicago Auto Show, Jeremy B - ICE MAN

Quote:

Originally Posted by WorldWind

Looks very nice!!

For fun I just went back over the whole thread... once again very impressed.

Thanks big guy.

ICEMAN99TURBO · 02/08/2010, 05:11 PM

Some teaser pics that Paul (my bud/co driver) took when we delivered the car to Chicago on Friday.

The 3g and NYer..the hauler, man I love big cars!!

After the wheels were put on.

Proud... you have no idea.

Going over things with the head of detailing.

zeroeclipse · 02/08/2010, 05:34 PM

congrats on winning man a great car to rep for the 3g community. what did you use to block off the air to the back of the gauges?

SmoothGt · 02/08/2010, 05:47 PM

ur car is real clean i like it.

the 3000gt, i love, i used to have one, but that one looked so stock, almost as if nothing was customized...

and the black 3g...i thought looked gangsta lol, ive seen that body kit and been like yuck, but i thought it looked good, but congrats on the win, i love what u did with the interior and the carbon fiber and the gauges..

shata · 02/08/2010, 05:51 PM

I think im in love with ur CF stuff and gauge setup, did you make CF pieces yourself?

ICEMAN99TURBO · 02/08/2010, 06:50 PM

Quote:

Originally Posted by zeroeclipse

congrats on winning man a great car to rep for the 3g community. what did you use to block off the air to the back of the gauges?

Nothing, I was going to put foam pieces but never got around to it.

Quote:

Originally Posted by shata

I think im in love with ur CF stuff and gauge setup, did you make CF pieces yourself?

No actually, I wish I could have but I bought them from another member back in 2004. Back then there was a GB on the custom pieces and I was late to get in on it, so I found a member who was selling his... Not sure how many other 3Gs still have the original pieces?

ICEMAN99TURBO · 02/09/2010, 06:01 PM

Car was moved into the show last night for fear of the weather!

I was a reck today thinking they would move it today with the snow... and my summer wheels.

My buddy Loco told me something that made me feel better.

Quote:

Originally Posted by Loco

These guys are pros dealing with everything from Kia to Ferrari and I doubt they all have snow tires.

Here is the 1st of many, playing around with the program so I can get ready for all the other footage, enjoy.

YouTube - Delivering My 3G to the 2010 Chicago Auto Show

EZT · 02/09/2010, 06:15 PM

Quote:

Originally Posted by ICEMAN99TURBO

Car was moved into the show last night for fear of the weather!

I was a reck today thinking they would move it today with the snow... and my summer wheels.

My buddy Loco told me something that made me feel better.

Here is the 1st of many, playing around with the program so I can get ready for all the other footage, enjoy.

YouTube - Delivering My 3G to the 2010 Chicago Auto Show

Nice little video.

ICEMAN99TURBO · 02/10/2010, 11:10 PM

Got to Chicago again without a hitch. Mom, Dad, and our friend Danny Little followed me over to come to the Press Days with me. Roads were fine and clear after we got past Flint, MI... We got into Chicago around 3:30 and stopped and got the hotel room (where my parents and Danny will be staying) and headed into town. Got to the show and met up with my contact Nate Russell, got registered and got all of our press passes....All I wanted to do was see the car.

I was a nerved up as a cat in a room full of rocking chairs... Kind of stupid I guess, but everything is new to me and was excited to see what they all did to my car... Then I seen her..

I almost cried.

I will have better pics tomorrow, these were taken with my Cell Phone.

Never would I ever dreamt that something I put together would be on this grand of stage...This isn't some rinky dink home town car show, or a festival show, this is the AUTO SHOW! Again, I can not express how honored I am to have been picked and be here. More pictures to come as tomorrow were will be there for the Main Press Day.

Loco · 02/10/2010, 11:12 PM

Besides the RimZ and personal plate.. whats the difference?

11/25/2009, 04:58 PM	#307 (permalink)
Clipse3GS Hello :) Join Date: Sep 2005 Location: Cleveland,Ohio Vehicle: 08 Evo X /00 GS track car Posts: 4,759	I see Jeremy even works on his car in the gloves __________________ [FONT="Century GothiceeFONT]

12/11/2009, 12:47 AM	#316 (permalink)
05eclipse05 Live Loved, Is Lived Join Date: Jan 2007 Location: Grand Prairie, Tx Vehicle: 05 Eclipse Remix Edition Posts: 4,360	Jeremy, your car makes my southern region head north. __________________ If life is a highway, mine is missing some signs.

12/11/2009, 07:21 PM	#318 (permalink)
Bitter am cat Join Date: May 2004 Location: South of Chicago Vehicle: 2007 Camaro Posts: 35,660	need oil pressure too. __________________ 2000 Celica GTS 'slowest gts evar' 1993 Geo Prizm 7A-FE/A245E

12/12/2009, 09:37 AM	#320 (permalink)
Pace187 01 GT Join Date: Jan 2008 Location: New England Vehicle: 01 GT Posts: 2,759	it would drive me nuts not having heat come out of those vents __________________ Members Ride....Check it out

12/14/2009, 06:48 PM	#326 (permalink)
05eclipse05 Live Loved, Is Lived Join Date: Jan 2007 Location: Grand Prairie, Tx Vehicle: 05 Eclipse Remix Edition Posts: 4,360	It's not a race, It's a rally __________________ If life is a highway, mine is missing some signs.

11/25/2009, 03:20 PM	#305 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	The front bank... Better than when I first got them! Well, I finally got a chance to get under the car and get my down pipe off and welded as well....Loverly welds are all cracked or breaking. So I just had the down pip finished... beautiful. Inside... Apon installing I thought everything was good....WRONG! Found a bit of light coming from, you guessed it, the rear bank. Well, I might as well get it done as well. You can see where the crack is and how I taped it to keep the correct position of the holes. Here is the new Clock pod I just has cleared as well... Ooooo Pretty. ...the CF work was done by another member but I did the clearing. Here is the one I had in the car for years and as you can tell the material is pulling away from the piece and is cracking...Not sure what I am going to do with it. A picture of my radio bezel after a fresh coat of clear, just doing a little wet sanding and buffing to really make her shine.

11/25/2009, 04:22 PM	#306 (permalink)
WorldWind Exacerbated Member Join Date: Jul 2001 Location: Lake Havasu Vehicle: 2kFsGt5sp/TbPP Posts: 2,682	Looks very nice!! For fun I just went back over the whole thread... once again very impressed.

11/26/2009, 12:22 AM	#309 (permalink)
smackalan Senior Member Join Date: May 2005 Location: Detroit, MI Posts: 706	Always was a fan Jeremy.

11/26/2009, 10:37 AM	#310 (permalink)
catch-me Head Swap Baby!!! Join Date: Aug 2007 Location: Zeeland, MI Posts: 349	I'm still suprized those welds on the headers are cracking like that. At lease you don't need to drive it around sounding like a truck any more

12/10/2009, 10:28 PM	#314 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	Got my dash pieces all done and looking pretty and my rear bank is all welded up, ready to go on! Now I'm just waiting on my gauge pod and my new oil temp gauge....guess what is next.

12/10/2009, 10:33 PM	#315 (permalink)
fast gt Member Join Date: Feb 2009 Posts: 98	very nice ive always liked ur car

12/11/2009, 10:47 AM	#317 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	Was going to go to work today, but it is so windy and cold that it would be just a huge fight.. So I went to the coffee shop and visited some of the older guys. Came home and much to my surprise.... Had to test the new A/F to see how it would fit. Due to the shallow back I couldn't put it where narrow one is now, so I had to step up. Here is what is going in place of the narrow band A/F....Kind of see what is going to happen this winter?

12/14/2009, 06:55 PM	#327 (permalink)
EZT Miles Teg Join Date: Apr 2008 Location: Gainesville Vehicle: 2000 EclipseGT Posts: 1,999	That radio bezel and clock pod look great. And the gauges there are very nice. One day I hope to add some necessary gauges, probably on a triple gauge pillar though. __________________ "You who have defeated us say to yourselves that Babylon is fallen and its works have been overturned. I say to you still that man remains on trial, each man in his own dock. Each man is a little war"

12/24/2009, 03:37 PM	#332 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	Progress from last weekend, going to get back out to the shop in a little bit to try my new O2 bung that just came in from Summit. Here are some pics... The 3G...apart. Wiring up the wideband and the oil temp gauges. Wideband installed Not that bad if I do say so myself. :snap:

12/24/2009, 07:42 PM	#333 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	Update... Rubber gromit worked like a glove, just had to grind the hole out a bit more to make it work; it seals tight and works good. Did a "free-air" calerbration on the LC-1 and re installed that, fired her up and the new wideband works cat's ass! Now all I have to do is get the light wire installed for the oil temp and that gauge can be installed. ...And yes, I worked on my car on Christmas Eve. I wanted to get it done to see how it looked and I am very happy with the results.....now it is time for a drink and visit with the family. Merry Christmas everyone!

12/26/2009, 12:42 AM	#335 (permalink)
Chicago3g Senior Member Join Date: Dec 2009 Location: CHICAGO IL Vehicle: MITSUBISHI ECLIPSE 02 GT Posts: 169	one of the CLEANIEST 3gs wat kind of wheels are thos

01/02/2010, 01:44 PM	#342 (permalink)
iam2fast4u Member Join Date: Oct 2009 Location: Mid-West Vehicle: The Silver GTS Posts: 49	Haha and what might that price be? How much did it cost to have all four painted? Are they powdercoated? But arent all the three colors the same, just painted spokes and part of the lip? TEchnically you could paint any of the three black and they would turn out the same, and actually I think I saw some gunmetal ones on NEXT's website I will look again and look for a link and post it up Edit: enkei rsv gunmetal gloss Wheel Rim at WheelsNext.com __________________ 2004 Silver GTS Last edited by iam2fast4u; 01/02/2010 at 02:03 PM.

01/17/2010, 05:11 PM	#344 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	A few months ago I sent some pictures to MMNA for a contest they are putting on to showcase your car at one of the many Auto Shows for North America. Well, lets just say I am in the final 3 to have the car showcased at the 2010 Chicago Auto Show! Here is the link to vote, thank you all from the bottom of my heart. The AutoShowoffContest: Voting Here are the others I am up against... Looks like a 3G, but..... honestly no where close to something I would want representing my company. and... 3000GT SL ...Not a VR4???

01/17/2010, 05:53 PM	#345 (permalink)
wright06jhs Senior Member Join Date: Jul 2006 Location: Lexington, Ky Vehicle: Stratus Posts: 2,339	voted for you. __________________ 2002 Stratus R/T

01/18/2010, 12:55 AM	#346 (permalink)
03Quicksilver3G FEEL THE BOOST! Join Date: Aug 2009 Location: Rio Rancho, NM Vehicle: 03' Quicksilver GS-T Posts: 1,448	Voted for you, hope you win __________________

01/23/2010, 11:31 AM	#347 (permalink)
NiteRyd AKA Nick Join Date: Jan 2004 Location: Pewaukee, WI Vehicle: 06 RX-8 Shinka, 09 Matrix Posts: 1,448	So the winner was annouced yesterday, was it you Jer?

01/23/2010, 02:28 PM	#348 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	No one knows yet.. nothing has been stated, shown, or announced.

01/23/2010, 02:46 PM	#349 (permalink)
Jabber insert funny title Join Date: Feb 2005 Location: Chicago Vehicle: 2003 Audi A6 2.7t quattro Posts: 5,302	WTF Jer! Get on the ball and start calling people. I need to know if I should bring the california duster for your car or the flamethrower for the other ones.

02/08/2010, 05:11 PM	#352 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	Some teaser pics that Paul (my bud/co driver) took when we delivered the car to Chicago on Friday. The 3g and NYer..the hauler, man I love big cars!! After the wheels were put on. Proud... you have no idea. Going over things with the head of detailing.

02/08/2010, 05:34 PM	#353 (permalink)
zeroeclipse Senior Member Join Date: May 2009 Location: Arroyo Grande, CA Vehicle: 2000 eclipse gt Posts: 242	congrats on winning man a great car to rep for the 3g community. what did you use to block off the air to the back of the gauges? __________________ eclipse kid

02/08/2010, 05:47 PM	#354 (permalink)
SmoothGt Member Join Date: Jan 2010 Posts: 98	ur car is real clean i like it. the 3000gt, i love, i used to have one, but that one looked so stock, almost as if nothing was customized... and the black 3g...i thought looked gangsta lol, ive seen that body kit and been like yuck, but i thought it looked good, but congrats on the win, i love what u did with the interior and the carbon fiber and the gauges..

02/08/2010, 05:51 PM	#355 (permalink)
shata Shata Scatta Shred! Join Date: Oct 2009 Location: Virginia Beach, VA Vehicle: 02 Silver Eclipse GT Posts: 466	I think im in love with ur CF stuff and gauge setup, did you make CF pieces yourself? __________________ Member Ride <Link> ::114k Miles /w Mobil 1 Everything Synthetic ::K&N Air Filter ::24 Brand New Valve Lifters ::03 Eclipse Rinolined Filler Neck ::Exedy Clutch/Pressure Plate ::Fidanza Flywheel 9.5lbs ::Repairs - Belts, Master/Slave clutch cylinders

02/10/2010, 11:10 PM	#359 (permalink)
ICEMAN99TURBO :snap: Okay! Join Date: Feb 2001 Location: Bad Axe, MI Welcome 2 HICKTOWN Vehicle: Y2K GT-P Posts: 22,330	Got to Chicago again without a hitch. Mom, Dad, and our friend Danny Little followed me over to come to the Press Days with me. Roads were fine and clear after we got past Flint, MI... We got into Chicago around 3:30 and stopped and got the hotel room (where my parents and Danny will be staying) and headed into town. Got to the show and met up with my contact Nate Russell, got registered and got all of our press passes....All I wanted to do was see the car. I was a nerved up as a cat in a room full of rocking chairs... Kind of stupid I guess, but everything is new to me and was excited to see what they all did to my car... Then I seen her.. I almost cried. I will have better pics tomorrow, these were taken with my Cell Phone. Never would I ever dreamt that something I put together would be on this grand of stage...This isn't some rinky dink home town car show, or a festival show, this is the AUTO SHOW! Again, I can not express how honored I am to have been picked and be here. More pictures to come as tomorrow were will be there for the Main Press Day.

02/10/2010, 11:12 PM	#360 (permalink)
Loco Ur a worthless noob Join Date: Jul 2002 Location: Wherever you want me to be Vehicle: '09 Lancer GTS Posts: 8,920	Besides the RimZ and personal plate.. whats the difference? __________________ "If I wasn't me, Id want me"