![]() |
![]() Support Our Troops! |
Support Club3G! |
|
|
#1 (permalink) |
|
Sprayin
![]() |
The Burgundy Beast: UPDATED!!
Just took these pictures at the NOPI Nationals in Atlanta, September 15-16. Have dropped a ton of money on this car since many of you last saw it....and best of all, no more tan interior. Also, new vanity plate
![]() OLD PICS: ![]() ![]() ![]() NEW PICS: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() MOD LIST: PERFORMANCE MODS: Performance: -AEM Short Ram Intake -Proflow Bored Throttle Body -Diamante Intake Manifold -Ripp Long Tube Headers, High Luster Ceramic Coated By HPC -Custom Downpipe with CATCO Hi-Flow Catalytic Convertor -HKS Carbon-Ti Exhaust for 95-99 GS-T -Magnecor 8.5 mm Ignition wires -NGK Copper Plugs, 1 Step Colder -Apex'i S-AFC II Black, Tuned ~ 13.5 AFR -Deyeme Racing Firm Motor Mounts All Around -ACT HD Clutch -AASCO Aluminum Flywheel -B&M Short Throw Shifter -NX EFI Wet Kit, 75 Shot -NX Carbon Fiber Fuel and Nitrous Solenoids -ZEX Dual Purge Solenoid, Routed Behind Hood Pins -MSD Digital Window Switch -ZEX Digital TPS Switch -NX 10lb Bottle -NX Remote Bottle Opener -NOS Pressure-Actuated Automatic Bottle Heater -DynoTune Nitrous Bottle Blanket Handling: -Tein Super Street Suspension, Pillowball Upper Mounts -RRE Rear Strut Tower Bar -RRE Rear Camber Kit -Motegi DP6 18"x7.5" Wheels -Nitto NT555 225/40/ZR18 Tires -Power Slot Big Brake Kit -RRE Braided Stainless Steel Brake Lines -Hawk HPS Brake Pads SHOW MODS: Under The Hood: -Polished Diamante Manifold -Hose Techniques Super Red Hose Kit -Tearstone Polished Aluminum Reservoir Cap Set -Deyeme Racing Polished Aluminum Radiator Mounts -Deyeme Racing Polished Aluminum Battery Bracket -Injen Polished Aluminum Fuse Box Cover -Injen Oil Cap -Valve Cover and Ripp Headers, High Luster Ceramic Coated by HPC -Optima Red Top Battery Exterior: -Buddy Club Front Bumper, Custom Painted Semi-Gloss Black Lip -ViS Carbon Fiber OEM Hood, Paint Matched on sides -Sparco Hood Pins -Sonar Projectors with Sylvania Silverstar Bulbs -Clear Corners -Zappedman Corner and Fog Light Blackouts -Motegi DP6 18" Wheels, Gunmetal with Polished Lip -Black Painted Brake Calipers -Semi Gloss Black Rear Pillar Inserts (Because they looked like shit) -ViS Falcon Rear Wing -TYC Black Taillights -Rear Carbon Fiber Emblem -Zappedman Custom Rear Corners -Black Lettering Inserts Interior: -Black Interior Swap -Uncracked Dash Swap (for however long that will last) -Custom Metal Flake Silver Accents -Metal Flake HVAC Overlay -Carbon Fiber Wrapped Dash Pieces, by Carbonworks -Custom Suede Wrapped Airbag Covers -Custom Mounted S-AFC II Black -BelTronics Vector 940 Radar detector -Reverse Glow Gauges -Brushed Aluminum Gauge Overlay -Autometer Dual Gauge Pillar -Autometer Nitrous Pressure Gauge -Autometer Water Temp Gauge -B&M Shift Knob -Redline Goods Shift Boot -Redline Goods Parking Brake Boot -Redline Goods Armrest Cover -Sparco Navigator Dead Pedal -Sparco Grip Pedals -Sparco Shoulder Pads -Custom Fitted Privacy Cover for Strut Tower Bar -BBKSV 10" Subwoofer Enclosures -Hidden 10lb Bottle in Spare Tire Compartment Sound System: -Alpine Type S Front Component Speakers -JVC KD820 Head Unit, with USB -Pioneer 6x9 Rear Speakers -2 Pioneer 10" 400W Subwoofers -Rockford Fosgate P3001 Amp Did all the work on this car myself, so if there are any questions on the custom work, i would be glad to answer them.
__________________
If its fast and reliable, its not cheap; if its fast and cheap, its not reliable; if its cheap and reliable, its not fast. The Burgundy Beast Last edited by eclipsegtracer; 10/01/2007 at 03:53 PM. |
|
|
|
|
|
#3 (permalink) |
|
Sprayin
![]() |
Havent had a bulb go yet, but not exactly 'easy' to take off, they are bolted down solid to account for how i drive with the coilovers lol. How they bolt down depends on you though, the biggest pain to removing these would be getting the wires from behind.
__________________
If its fast and reliable, its not cheap; if its fast and cheap, its not reliable; if its cheap and reliable, its not fast. The Burgundy Beast |
|
|
|
|
|
#11 (permalink) |
|
Anastacia HOE!!!!
|
I like that Front end. Its looking really good on yours. I dont like that exhaust either Nor the silver interior. But other than that i like it.
__________________
FOR SALE HERE... http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m32 http://charlotte.craigslist.org/cto/827957044.html |
|
|
|
|
|
#14 (permalink) |
|
Sprayin
![]() |
As far as the interior, i like it better than stock but still have an urge to fiber glass it and make it look smoother, but still like the silver, sorry
. If i had the time and money i would make the interior ALL silver and black because im just another 3G owner griping about tan interior. As far as the exhaust i know it's a hit or miss because either you love or hate the HKS/A'PEX style exhausts, i personally love them and my favorite exhaust has always been the HKS Carbon-Ti ever since i saw it on an 800hp Supra single turbo. Now pep-boys exhausts angled downward to fit look tacky IMO, but i like the angle of a $600-$800 exhaust system, you can def tell the difference, those ones always angle upward. Oh, and the rear corners are never going anywhere, it was a design i came up with and had Zappedman custom make, and that is one of my favorite parts of this car. As far as what i get complimented on most about this car? Everyone seems to love the wing, especially domestic guys with camaros and trans ams.
__________________
If its fast and reliable, its not cheap; if its fast and cheap, its not reliable; if its cheap and reliable, its not fast. The Burgundy Beast |
|
|
|
|
|
#16 (permalink) |
|
Resident Asshole
![]() |
that exhaust looks like complete shit. angled and sticks out way too far from the bumper. other than that the car is alright. that exhaust just takes so much away from the car and doesn't blend in nicely with the rest of the car. its such an eyesore. my eyes go straight to the exhaust when i look at the rear of the car
![]() |
|
|
|
|
|
#17 (permalink) |
|
Mac&Chesse is good!!
|
I like the interior mainly because im just getting idea on how to paint mine. I dont like the exhaust to much of an angle. I lov ethe front bumper though looks good. The rims are nice...Overall this car is pretty sweet. BTW where did you find those red wires in your engine bay? Im looking to get some.
|
|
|
|
|
|
#18 (permalink) | |
|
SC-CUSTOMS.com
![]() Join Date: Jan 2006
Location: Fairfax, Virginia
Vehicle: 04Armada-08Altima-03GTS
Posts: 10,203
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
![]()
__________________
Member Ride Photos, CLICK - http://www.club3g.com/forum/members-...s-eclipse.html Officially Sponsored by Meguiar's, Nitrous Express, and Sport Compact Customs |
|
|
|
|