|
|
|
|||||||
| Register | FAQ | Members List | Social Groups | Calendar | Arcade | Mark Forums Read | Auto Escrow | Auto Loans | Insurance | Advertise |
Topic Review (Newest First)
|
| 01/09/2017 08:46 PM | ||
| johnny340 |
My ears don't lie. The deck changed and the sound got better; maybe due to features not available on the stock deck but who cares? It's better. End of story. It's false advertising to suggest this isn't possible. Not everyone needs to spend $2000 on the system in their $2000 car like you did. Just trying to help. Go ahead and get that last post in....I won't be checking. All done here. |
|
| 12/31/2016 12:48 PM | ||
| soundman98 |
it's false advertising to others to indicate that a simple deck change can change the overall sound, because it simply can't. the oem deck and aftermarket decks both offer similar 2v preamps, so there's no loudness difference there, and the overall sound quality of the system components is the same, so there can't be any difference there either. the only difference there can be is the sound-shaping options in the new deck, and pioneer likes to enable those by default in an effort to 'wow' people that install the deck to think that it was that dramatic of an improvement, which is what i believe is affecting your opinion-- just as new tv's have a 'home' setting and a 'store' setting which changes the color tints to look better on the store shelves. in my eclipse history, i've run 2 different pioneer decks with the stock amp(have had 6 different pioneer decks total), as well as a full aftermarket amplified system, and a full-active carpc setup. the only thing i never did in the eclipse was a 5.1 setup because the speaker locations didn't allow for good placement, but the center dash speaker which allowed for a 5.1 setup was a main motivator for buying the car.. |
|
| 12/30/2016 05:05 PM | ||
| johnny340 |
Quote:
|
|
| 12/28/2016 06:35 PM | ||
| soundman98 |
the sound quality can't change if you only did the deck. the stock speakers and stock amp would cripple a new deck to the same level as what the oem radio did. i suspect the loudness is turned on, which artificially boosts the low's and high's, or your eq settings are skewing your perception. |
|
| 12/28/2016 12:38 PM | ||
| johnny340 |
Quote:
https://www.pioneerelectronics.com/P...ers/MVH-X580BS I cannot believe the improvement! I did this swap mainly for blue tooth etc but the sound is so much better!!! This amp is super cheap, sounds great and has amazing features. Second vehicle I've put one in and highly recommend them. Get the premium stereo wiring harness adapter kit which comes with the two RCA pairs and main connector (you only use 3 of the 4 factory wires) and don't worry about the other small connector on the factory stereo since the speakers are hooked up to the amp already. Plus you need a single din surround obviously and that's it! $130 total and you will be very happy. By the way, the links above don't work (as mentioned) but you don't really need this info if you use an adapter harness. |
|
| 07/24/2016 09:21 PM | ||
| remotefailure |
Is the infinity amp a six channel amp? I'm at the cross roads of wanting to upgrade my infinity system on my 2000 gt, and so I'm wondering what to do first. Should i get a replacement for my infinity amp, and upgrade the speakers, or first go with a replacement head unit, most of which only have 4 channels of amplification. I've read that the amplifier was 2 ohm, so I'm guessing that most after market radio's will not work well with this ohm rating. If the factory amp is indeed, a six channel system is it possible to wire up the the system so that tweeters, center channel, and door speakers are the front channel, and then say the rear speakers are for the rear? Or maybe do something like have the tweeter/ center channel as the front, door speakers, as rear channel from the head unit amplifier, then use a sub out to a 2 channel amp for the rear seat wall speakers. When i look at speakers all the 6x9 speakers always have way more power handling capability then, the 6.5" speakers in the doors, which from my perspective making it difficult to find a amp that would match well, since most all seem to have equal rms ratings a crossed all channels. What does every one else do? Do you ditch the tweeter/ center channels when using a 4 channel head unit with built in amplifier? |
|
| 01/28/2014 10:10 AM | ||
| gabessdsp |
Quote:
|
|
| 01/22/2014 11:04 PM | ||
| Brandon1310 |
Fuel injector wires ripped I ripped the fuel injector wires from injectors 1,3, and 5. I ripped them out of a 4-prong harness which when all plugged on right lead from the fuel injectors to the distributor. Now I don't know which wire goes to which prong on the connector. Can anyone help?! |
|
| 10/10/2013 10:27 PM | ||
| kristi3193 |
I have a question about cruise control. I have a 2003 eclipse. It's my baby  but my cruise control went out. And I'm wondering what happened. The light comes on on the dash. But the cruise control itself isn't working. Could it be a fuse? Or what?
|
|
| 01/01/2013 04:39 PM | ||
| Ken | The pinout information can be found in the FSM. Search and you shall find it. | |
| 12/31/2012 04:18 PM | ||
| MECP | There's a lot more to the radio than just wiring depending if you have premium sound or not. Either way, you should use an adapter and not cut the factory harness. | |
| 12/31/2012 03:52 PM | ||
| Daquan803 | Do anyone have the radio wire diagram ? | |
| 12/31/2012 03:50 PM | ||
| Daquan803 | I need 2001 ! | |
| 01/20/2012 11:36 PM | ||
| bpears |
2001 is the only one I think isn't working... n that's the one I want! 
|
|
| 01/17/2012 09:26 PM | ||
| MECP | Links in the top post work fine for me... | |
| 01/17/2012 09:11 PM | ||
| bpears |
Quote:
|
|
| 07/16/2011 08:50 AM | ||
| JermTheElf |
Couldn't get the links to work, I found a wiring diagram for the 2000-2002 eclipse. This is just for alarm installs which is what I needed them for. 2000 -2002MitsubishiEclipseVehicle Wiring Chart and Diagram |
|
| 05/06/2011 12:26 AM | ||
| MECP | In the above links, replace www.raminal.com with family.raminal.com. I'll update the web server tomorrow to fix the links. | |
| 05/06/2011 12:14 AM | ||
| abhoover29 | Does anyone have a wiring diagram for 2000 eclipse gt? The links at the top are not working and I have searched for anything without luck. | |
| 06/05/2010 10:01 PM | ||
| quick92rs |
DEI Directwire printout for a 2000.    May not be the same for all vehicles. I'll post up the different variations when I have more time. |
|
| 03/08/2008 04:52 PM | ||
| mrbomb |
where exactly is the ETACS ECU at? i think i located most of the wires in a plug that is on top of the fuse dash fuse box also where is the 15 pin plug at? it says above the fuses but i cant really find it this is for an 03 RS btw if anyone could take some pics and point them out for me that would be awesome |
|
| 02/23/2008 03:27 AM | ||
| AgentSkully |
thought these might be useful as well, if they are not appropriate then feel free to erase them. edit, this is the factory infinity wiring diagram for the 3g.  
|
|
| 11/22/2007 08:25 PM | ||
| carlili4190 | Ill start a new Thread for 2007 | |
| 05/23/2007 03:03 PM | ||
| MECP | 2003 is fixed. | |
| 05/23/2007 02:56 PM | ||
| Raiku | 2003 link didnt work | |
| 01/22/2007 01:16 AM | ||
| Nolanm_06 |
Quote:
|
|
| 01/21/2007 10:47 PM | ||
| catalyst007 | sorry my mistake, i saw that the 03 wasn't working, what i meant was is there an 03 up, or can i just relate to another year? (should be similair no?) | |
| 01/21/2007 10:42 PM | ||
| MECP | Updated as in? DEI doesn't have any '07 diagrams out yet if that is what you are asking. | |
| 01/21/2007 10:32 PM | ||
| catalyst007 |
is there an updated list on these wiring diagrams?? thanks |
|
| 02/02/2006 02:41 AM | ||
| MECP |
2000-2006 Eclipse wiring diagrams PDF Files 2000 Eclipse 2001 Eclipse 2002 Eclipse 2003 Eclipse 2004 Eclipse 2005 Eclipse 2006 Eclipse |
|
