Mitsubishi Eclipse 3G Club banner
engine
1-20 of 58 Results
  1. 3G Eclipse GT/GTS Specific
    Hello! I'm needing to pull my 6G72 out of my 01 Eclipse to do an A/T to M/T swap. I have the factory service manuals that step-by-step tell you what you need to do to remove the engine, but it doesn't mention where to mount the hoist to. Where are some good spots to mount the hoist to that are...
  2. 3G Eclipse General Discussion
    Hey I’ve made a few posts before but now I plan to focus on my engine. I currently own a 2000 EclipseGT V6 3.0l. Since buying it I have cleaned the throttle body , MAF sensor, IAC valve , replaced the valve cover gasket for the front valve cover and changed all the sparks. IM looking for...
  3. New Members Forum
    My car has a loud rattle/tap at start up. But it doesn't happen all the time, very inconsistent but often. Does anyone else have this? I've heard it could be a lifter but it is much louder than a lifter tap, and it seems to be coming from the left side of my engine bay. My car is a 2005 3g...
  4. 3G Eclipse General Discussion
    Hello, I was going to switch the fuel injectors in my 2003 GS and before I started saw that I had injectors for the 3.0L V6. Can I use the fuel injectors for the 3.0L V6 engine in my 2.4 L 4cyl or will this cause any problems?
  5. 3G Eclipse RS/GS Specific
    Should I do a manual transmission swap or do a 4gjs swap? I only have time to do one right now. Right now my car is stock with only an exhaust upgrade. Any thoughts?
  6. New Members Forum
    So I have a question for you guys about swapping the6g72 engine, with the stock 6g72. The parts that I know that I need are. Alternator bracket Upper power steering bracket 6ft of vacuum hoses A/C and power steering belts Oil filter 2.5in pipe connector. I read one of the guides about it and...
  7. Automotive For Sale / Wanted
    Hi all, I'm in the process of getting ready to move and am looking to get rid of EVERYTHING that is sitting in my basement. Prices are before shipping so I'll need a zip code to get the full quote, and please let me know if you want any additional pictures of something! (Yes some things are...
  8. Problem Reports
    Hello, i new here, and this is my first post. Anyway, before i go to the problem(s), im going to give a little background on my car. i bough a 2000 gt eclipse about 10 months ago it has 185.xxx miles (i know, a lot). and honestly, this car is a pain in the a**. it wasn't running when i bought...
  9. New Members Forum
    ok so im taking my blown 3.0 out in the upcoming days would like to know if its possible to take the engine out without removing the tranny, i dont want to fuck with clutch linkage and shit. any help or hints would be helpful.
  10. Automotive For Sale / Wanted
    location Kansas City, MO I have and engine out of a 03 eclipse gts with a bad rod bearing that threw a connecting bolt. It won't turn over because the connecting rod is jammed in one of the cylinders. Has around 190,xxx Cons Bad bearing Would need a new rod and possibly a new crankshaft. Some...
  11. 3G Eclipse GT/GTS Specific
    Hey there, Title explains it all. I was driving on the highway a couple months ago when my tensionner pulley fell off. The car started making a humming sound ever since coming from the engine mount. I fixed the pulley and everything else. Even took my car to a Pep Boys who said that the sound...
  12. Problem Reports
    I'm having a weird problem with my 2001 Spyder GT automatic. Under heavy acceleration there is a nasty grinding sound from the engine bay, it does it in 1st, 2nd, and 3rd gear (haven't tested 4th because that would be a little too fast), it also does it in neutral/park sometimes. This is an...
  13. New Members Forum
    Hey y'all new member. My engine in my 2000 eclipse just went on me. 4 cylinder non turbo nothing fancy except headers and air filter under the hood. A friend of mine suggested doing a swap with a 4g 6.3 96 eclipse engine. I know I'll have to do a new tranny and computer. But is there another...
  14. Cars for Sale/Wanted
    Hey guys, Since my timing belt snapped while going 50 mph down the road, I'm more than certain I have head damage (not to mention after it died, I had no idea what happened, so when the car came to a stop, I tried cranking it 3 times), after pricing a new alternator, a new oil pump, new timing...
  15. Automotive For Sale / Wanted
    Title Says it all... I hate to see it go, but I have to get rid of it. City keeps giving notices about fines... City ordinance: no inoperable or unregistered vehicles. IF you want it, and can get it towed. Let me know today, or it'll be gone. I would like to see it at least get used for parts...
  16. New Members Forum
    Hello guys, I'm new to the forum just registered today, and I have a few question if someone can help me answering them it would be awesome. I have a 2005 mitsubishi eclipse gts 3.0 v6 automatic ( yea I know, wish it was a manual), so far I did upgrades on the interior, exterior, lighting, a...
  17. Problem Reports
    What's up... I drive a 2001 Eclipse GT Spyder 3.0 and I've been having EGR related codes which caused misfires and low surging idles. So I searched and found a post on removing the vacuum hose that runs to the EGR and letting it hang there and to wait like 3 days. Well I went and unhooked the...
  18. Problem Reports
    2001 Eclipse GT spyder 5-speed. Okay so I've started to get this really bad noise from the back of my car when I start it. This only happens after I start it up after driving for a while and the engine is completly warmed up. For example I would go to the store, and after shopping I would come...
  19. Problem Reports
    Good evening, I have bought a 3g two months ago(before I had 2012 4g but rear-ended nissan centra on 65mph). Problem list: 1. So my baby is 2000 eclipse GT(bought at 134xxx, now 138xxx). So it was running pretty smooth for a months and than I noticed that when its idling it shakes...shakes...
  20. Problem Reports
    I noticed one of my spark plug tubes was leaking oil inside so i went and bought new saprk plug tube seals. I took off the valve cover and easily removed the old seals but when i went to press in the new ones, they just wouldnt go in. Does anyone know if this can be done at home? Do i need to...
1-20 of 58 Results
Top