Search Results for ‘intercooler’

2001 Mitsubishi GS Turbo Mileage: 176,000 miles Engine and Mods: Stock 2.4l 4g64 Refreshed head at 165,000 miles - Valve job, resurface, valve stem seals, mild smoothing of runners Balance Shaft Eliminator Kit Genuine Mitsubishi 16g turbo Custom 2.5 inch o2 housing Custom 2.5 inch down pipe...

i have for sale actron OBD-II scanner and code eraser 55shipped used 3inch Maf adaptor 15shipped new 2inch samco blue couplers 4ply 10each i have 3 of them new 3inch samco blue couplers 4ply 10each i also have 3 of them new 3.0 inch R1 racing aluminum 3 band t-bolt coupler 10each i have 2 of...

Hey guys, I just recently got my Ripp SDS kit on the car, along with the meth kit to keep things cool. I have been doing some thinking about intercooling the system, one for the looks of the intercooler, and also knowing that the intercooler is not electric and wont have a chance of failing like...

Can anyone tell me why there is no intercooler in RIPP SDSs?Will I get blown if I will install one on a stock engine (GTS) SDS stage 1?

I have been on here looking at the turbo setups. I have also looked at the thread "Turbocharging Explained" but things are not adding up. On tearstones thread it as this the drawing of a turbo setup. It has the compressed air from the turbo going through the intercooler, then into the engine...

Would there be a point in me getting CO2? I plan on going back to n2o but only with maybe a 100 shot this time or I just might go dry and save myself the trouble of getting to that damn fuel line. How would I benifit from having it if I do at all. Would I get noticable increases in power? I dont...

Well, i have been trying to find an efficient side mount intercooler for my setup, but so far i have been finding ones that support 500cfm max.... i will be running 1200cfm with my blower. Will i get significant pressure drop if im trying to force 1200cfm through a side mount that is tested at...

I'm having trouble finding a intercooler I want. There are so many different companys but most of them are either really expensive (spearco, greddy, Etc.) or Ebay cheap. Are most of the people using the one from Boostn.com like rulez? I don't want something cheap but I don't want to pay more for...

I got to see Snipershrk1's car over the weekend and his car has Neffarious's old turbo kit on it. I dont know why I hadnt ever realized it before bt its Air to Water intercooled. What a great idea!!!! Ive found Air to Water intercoolers that are 6" in diamter and 8" long cores that will take the...

I was wondering if anybody out there ever installed a air/air or air/water intercooler on the sds?Please dont give me, its not worth it or youll lose boost, I want to know from the people who have done it and their results Plus... I'v searched and only came up with the water/methenol mix, I'm...

I am piecing a turbo as we speak. I bought the xtech piping that I am going to do little mods to it to fit my likings. The biggest thing I wanted to do was put a front mount on there. I was searching around evolutionm.net and I could pick up a stock fmic for about $100. My question is would I be...

Has anyone had any experience with this? I'm looking at one for sale for $150 w/ a five pound bottle. Is there any horsepower gain or are the affects negligible? NX claims up to 50 hp from this I think but I don't believe it to be that much. Also, would there be any adverse effects of any...

ok Ive been searching boards of ways route my FMIC piping without cutting up everything. My FMIC is 6.5'' tall, 27.5 long (without including the end tank there like 2'' long)and the width of the FMIC is 2.2''. should i follow the piping style like rulez or does anybody have a better route to go

i have the sds stage 1 tuned with an e-manage. i was curious if it was possible to run stage 2 (9lbs i think) with out having an intercooler or meth/water cooler. any one try it or know for sure? it'd be nice to spend under $100 and gain quite a few hp! thanks

6.5 x 26.5 x 3.5 Hope its worth it.

Does anyone know the max horsepower a stock 2G smic is capable of flowing? I'm looking to use one for my turbo project and I need a side mount capable of flowing around 320-350 whp. I was also looking at a side mount off of a supra TT but they are little more expensive. Would any of these fit...

Has anyone found a successful solution to not loosing the front bumper brace when running a fmic? If so, who makes it or did you have it made?