Mitsubishi Eclipse 3G Club banner

Aftermarket radio wont come on after amp install!

3845 Views 6 Replies 5 Participants Last post by  soundman98
Hello, I recently put in an aftermarket headunit in my 2001 eclipse GT. My GT was equipped with the infinity system so i bought the metra harness, hooked it up and everything was fine. Then i go to install my subs and amp, get everything together, wires hid, then i disconnect the battery to connect the amp power wire. after this my amp turns on, but cars starts and it wouldnt idle. as well the power button is lit up but it wont turn on. i realize that they have a radio lock code but it shouldnt affect the aftermarket radio?? She is running a little better now so i think the idle might be relearned but the radio still wont come on. any ideas?
1 - 1 of 7 Posts
Did you by chance use the same wire for your constant as your turn on wire for your amp? I had a problem and had to wire a second wire for the amp to a 12v source ie: the cigaret lighter.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top