FS: 6G72 Longblock $300

280 Views 11 Replies 8 Participants Last post by matt92vr4, May 25, 2008

matt92vr4

Discussion Starter · May 23, 2008

For Sale: 6G72 Longblock. This is out of a Eclipse GT. My buddy got it back in 2003 and it has been sitting in my garage since then. He gave it to me a couple months ago and now I want to get rid of it. To the best of my knowledge he got it from a dealership. He was told that it was replaced under warranty for lifter tick from a very anal customer. The motor is very clean looking but thats all I know about it. It is missing the exhaust manifolds, upper intake manifold, and throttle body. The motor is located in Charlotte, NC. Local pickup only. I do not know if it is from a convertable. I do know that it was attached to an automatic transaxle.

$300

Someone please get this out of my garage!!

Thanks,
Matt

See less See more

Save

1 - 12 of 12 Posts

Smallville

· #2 · May 23, 2008

so this is just like a pretty much new engine, on the top end correct?

Save

MarkSpyder

· #3 · May 23, 2008

Smallville said:
so this is just like a pretty much new engine, on the top end correct?

my guess is that this is the original engine that was replaced. This is the one with "lifter tick".

Matt, Do you or does your shop do engine builds? I'm looking for a built longblock to boost. Possibly something bored out a bit. If you do, any idea what the turn aroud time would be to build this block? I can call the 3SX shop tomorrow if needed. I could pick it up as I am in Durham. Thx!

Oh, is there a way to find out what the compression ratio is for this engine without taking it apart?

Save

ahspimp023

· #4 · May 23, 2008

Want to part it out and sell me just the heads!

Save

kamikid

· #5 · May 23, 2008

if i could take the 4 out of mine i would buy the 6th and put it in but wouldnt fit i doubt it at least

Save

WarmAndSCSI

· #6 · May 23, 2008

Would you be willing to part with the alternator bracket?

Save

matt92vr4

Discussion Starter · #7 · May 24, 2008

Matt, Do you or does your shop do engine builds? I'm looking for a built longblock to boost. Possibly something bored out a bit. If you do, any idea what the turn aroud time would be to build this block? I can call the 3SX shop tomorrow if needed. I could pick it up as I am in Durham. Thx!

Yes we do engine builds good for 1000WHP if needed. Turn around time is about a month. Feel free to call the shop 704-784-3724.

I'd like to sell this motor complete. It's a killer deal for $300! How much do you want to pay for the heads and alt bracket? I guess if no one wants a complete motor I may have to break it down.

Save

Smallville

· #8 · May 24, 2008

matt92vr4 said:
Yes we do engine builds good for 1000WHP if needed. Turn around time is about a month. Feel free to call the shop 704-784-3724.

I'd like to sell this motor complete. It's a killer deal for $300! How much do you want to pay for the heads and alt bracket? I guess if no one wants a complete motor I may have to break it down.

well is the the motor with the lifter tick? or is this the new one? if it is the new one... then pm me and let me know the details!

Save

TSI27

· #9 · May 24, 2008

Smallville said:
well is the the motor with the lifter tick? or is this the new one? if it is the new one... then pm me and let me know the details!

Pretty sure its the motor with the lifter tick that was replaced with a new motor.

Save

Smallville

· #10 · May 25, 2008

^^^ shhh don't blow it.. im hoping he says that motor is the motor that is new just that his friend never came and got it.. ok

Save

DGJ04RT

· #11 · May 25, 2008

matt92vr4 said:
For Sale: 6G72 Longblock. This is out of a Eclipse GT. My buddy got it back in 2003 and it has been sitting in my garage since then. He gave it to me a couple months ago and now I want to get rid of it. To the best of my knowledge he got it from a dealership. He was told that it was replaced under warranty for lifter tick from a very anal customer. The motor is very clean looking but thats all I know about it. It is missing the exhaust manifolds, upper intake manifold, and throttle body. The motor is located in Charlotte, NC. Local pickup only. I do not know if it is from a convertable. I do know that it was attached to an automatic transaxle.

http://i119.photobucket.com/albums/o146/matt92vr4/Parts for sale/DSC03713.jpg
http://i119.photobucket.com/albums/o146/matt92vr4/Parts for sale/DSC03712.jpg

$300

Someone please get this out of my garage!!

Thanks,
Matt

Save

matt92vr4

Discussion Starter · #12 · May 25, 2008

This is not a new motor.

Save

1 - 12 of 12 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month