Mitsubishi Eclipse 3G Club banner

Oxidized Clear Coat on Wheel Lips

2698 Views 8 Replies 4 Participants Last post by  eclipto
I have a set of Racing Hart Evolution C5's and the clear coat of the lips is very oxidized and chipping. How should I go about removing it to put a new coat on? A friend of mine recommended steel wool, but would a very light grain of sand paper do the job fine? And also, would I need to remove my tires to apply the new clear coat? :scratch:
1 - 1 of 9 Posts
when i redid some irocs i had to sand down alot because if you dont get all the oxodation off it will just come right back soon after. i sanded them then wet sanded and used some rubbing compound and then cleared them.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.