[Ccyhanick]

Welp the title says it all. I'm new to the eclipse i have a 2003 gts v6 3.0.
My inside rearview was cracked so i cut the wires going to the clip that connects to the back of mirror. I have a new mirror but even after splicing wires still nothing. The new mirror is from the same car so maybe its a fuse but i have no idea where to begin on that.

Please help so i can have a radio and get onto the turbo!!!

 

[soundman98]

you won't be turbo-ing anytime soon unless you've got a second car and enough finances to rebuild most of the block (i've seen estimates in the ballpark of $10,000). the stock internals won't take much boost..

also, it was stupid to cut that harness. the mirror is a very standard odonelly mirror that was used in a massive amount of mitsu, chrysler, and gm vehicles, and are directly swapable between most vehicles except for a few gm's that add circuitry within the mirror for auto-dimming..

check the fuses in the little yellow block in the underhood fuse box.

 

[jkeaton]

^^ That. All you had to do was unplug the connector. Only time you whip out the cutters is in a bone yard.

 

[Ccyhanick]

yea found that out the hard way =( so its probably just fuses i looked at them but ill double check i have extra fuses but to be clear i have rewired the new mirror i had no idea what i was cutting because im a dumbass so i re wire that change a few fuses and im ok?

 

[Ccyhanick]

and i know this for a different thread but your saying dont bother even putting a little turbo like 5-7lbs of boost. Got the idea from a buddy just doing research on it. thanks again for the help

 

[soundman98]

not unless you've got loads of extra money laying around.. enjoy the car for what it is, not what it could be..