FS:v6 turbo kit, and Built heads, Big Price drop
I am putting my car back to stock so I will be selling parts from my car. If you have any questions about the parts pm me. Just need to get rid of this stuff have no use for it anymore.
FS:Custom fabricated v6 turbo kit Asking $2000 OBO without the turbo.
Or $2350 with the turbo. I am open to offers on the price let me know your offers.
I am leaning towards keeping the turbo for my next project.
Turbo kit will consist of
-Masterpower T4/T70 .68ar exhaust housing
-2.25 inch stainless steel Y-pipe
-3 inch stainless steel downpipe
-Knockoff Tial wastegate w/5lb spring and a mbc
-XS Power 31x12x3 Intercooler
-2.5 inch aluminum cold side piping
-4 inch inlet pipe
-Greddy type-s bov
-Greddy oil block adaptor
-Oil feed and return line
-Tapped oil pan
Please Note: This kit will require some modification to the car that it will be installed onto. I will include a custom fabricated intercooler bracket to mount the intercooler and also a support bracket for the turbo. Also will include aem wideband and glowshift egt and boost gauges for a little extra.
Front bank side of the Y-pipe and also the downpipe are heat wrapped.
![Image]()
Turbo inlet side pic
IMG]http://i48.tinypic.com/2d2ixis.jpg[/IMG]
Top of the rear bank of the y-pipe
![Image]()
Bottom of the rear bank of the y-pipe
![Image]()
Bottom side of the front bank
![Image]()
![Image]()
As you can see your crash bar will have to be modified unless you want to trade this modified crash bar for your stock one.
![Image]()
With the crash bar removed
![Image]()
A piece of sheet metal was removed to get the first intercooler pipe to the intercooler to fit.
![Image]()
Glowshift boost, and egt gauges that I will include with the kit. I have decided to keep the aem wideband for my next project.
![Image]()
I finally had a chance to remove the rest of the parts from the car. This is almost evertyhing that will come with the kit besides the oil feed line, greddy oil block adaptor, and the tapped oil pan.
![Image]()
Also this kit will not include the maf that is shown in the picture.
![Image]()
![Image]()
![Image]()
Pic with the intake pipe off of the turbo.
![Image]()
Ingalls torque dampner SOLD
Ripp mods meth kit SOLD
RPW cam gears SOLD
Walboro 255 pump SOLD
(6) 450cc low impedance injectors+resistor SOLD
Vr4 fuel rails SOLD
Heads SOLD
I am putting my car back to stock so I will be selling parts from my car. If you have any questions about the parts pm me. Just need to get rid of this stuff have no use for it anymore.
FS:Custom fabricated v6 turbo kit Asking $2000 OBO without the turbo.
Or $2350 with the turbo. I am open to offers on the price let me know your offers.
I am leaning towards keeping the turbo for my next project.
Turbo kit will consist of
-Masterpower T4/T70 .68ar exhaust housing
-2.25 inch stainless steel Y-pipe
-3 inch stainless steel downpipe
-Knockoff Tial wastegate w/5lb spring and a mbc
-XS Power 31x12x3 Intercooler
-2.5 inch aluminum cold side piping
-4 inch inlet pipe
-Greddy type-s bov
-Greddy oil block adaptor
-Oil feed and return line
-Tapped oil pan
Please Note: This kit will require some modification to the car that it will be installed onto. I will include a custom fabricated intercooler bracket to mount the intercooler and also a support bracket for the turbo. Also will include aem wideband and glowshift egt and boost gauges for a little extra.
Front bank side of the Y-pipe and also the downpipe are heat wrapped.
Turbo inlet side pic
IMG]http://i48.tinypic.com/2d2ixis.jpg[/IMG]
Top of the rear bank of the y-pipe
Bottom of the rear bank of the y-pipe
Bottom side of the front bank
As you can see your crash bar will have to be modified unless you want to trade this modified crash bar for your stock one.
With the crash bar removed
A piece of sheet metal was removed to get the first intercooler pipe to the intercooler to fit.
Glowshift boost, and egt gauges that I will include with the kit. I have decided to keep the aem wideband for my next project.
I finally had a chance to remove the rest of the parts from the car. This is almost evertyhing that will come with the kit besides the oil feed line, greddy oil block adaptor, and the tapped oil pan.
Also this kit will not include the maf that is shown in the picture.
Pic with the intake pipe off of the turbo.
Ingalls torque dampner SOLD
Ripp mods meth kit SOLD
RPW cam gears SOLD
Walboro 255 pump SOLD
(6) 450cc low impedance injectors+resistor SOLD
Vr4 fuel rails SOLD
Heads SOLD
