www.superbrightleds.com and if you want to know how pm me. by the way, where are u located at in nc?

 

This should tell you everything you need to know
http://club3g.com/forum/showthread.php?t=1445

 

http://club3g.com/forum/showpost.php?p=1967127&postcount=11

 

http://www.superbrightleds.com t.185 i think #74 bulbs they arent the full wedge bulbs tho so get the full bulb and twist in replacement 1.85$ a bulb i beleive. ends up like 10$ shipped. if you need more help pm me thanks.

 

If you're trying to change the lights behind your gauges, you're still going to need to scrape the backings of your gauges.

Having a obd tool thingymabober would be handy also, because to get to the back of your gauges, you have to remove your needles. The obd thing would help you calibrate your needles to the exact point where its needed to be.

 

or if you can't get the obd thing, fill up your gas tank before removal and then put the pin back in the same spot, get your car to normal op temp and put the pin back in the middle, let it idle(between 6-700rpm) put the pin back on. the tricky one is the speedo, this is what i did, find a long straight 4 lane highway and get a buddy to get up to 60 and hit the cruise then i matched his speed and set my cruise and stuck the needle back on at 60. checked against a pd radar gun and its only off 1-2 mph at 60.