Ok so here goes! New to the site, looking for some info,
Car: 1998 Eclipse RS was auto now 5spd
Engine: 420A Built to the hilt for boost
8.88 to 1
J E pistons, rings
Eagle Rods
Crower Cams Duration Intake 230 Exhaust Duration 231
High Volume oil pump
Under drive pulley
1.Wont idle after gagging on motor, after hard acceleration, coming back down to idle, unless you slam the gas one time, the car dies, but if you slam on the gas one time, it idles fine, we smoked it and found there to be no vacuum leaks. Could it be possible to big of a cam
2.Idles to low- 500rpm
3.Need full wring diagrams, can anyone point me in the right direction or post up a few links to get a full wirning diagram.
Thanks in advance and ill keep yall posted on my progress
Mike
Car: 1998 Eclipse RS was auto now 5spd
Engine: 420A Built to the hilt for boost
8.88 to 1
J E pistons, rings
Eagle Rods
Crower Cams Duration Intake 230 Exhaust Duration 231
High Volume oil pump
Under drive pulley
1.Wont idle after gagging on motor, after hard acceleration, coming back down to idle, unless you slam the gas one time, the car dies, but if you slam on the gas one time, it idles fine, we smoked it and found there to be no vacuum leaks. Could it be possible to big of a cam
2.Idles to low- 500rpm
3.Need full wring diagrams, can anyone point me in the right direction or post up a few links to get a full wirning diagram.
Thanks in advance and ill keep yall posted on my progress
Mike
