Mitsubishi Eclipse 3G Club banner
Status
Not open for further replies.

Group Buy: Tearstone Billet Reservoir Kits

19K views 501 replies 44 participants last post by  joeydpogi  
#1 ·
This group buy is now: **CLOSED!!**
This group buy is now: **CLOSED!!**

Permenant product listings are now posted on http://tearstone.com

Thank you all for making this a success!

Automatic/Sporttronic Kits:
Image


Image


5 Speed kits:
Image


Image




This kit will still be available through http://tearstone.com

Here is your chance to get something totally unique for your engine bay that many of us have been wishing for many years to come true. Today makred the production of the first element of the Tearstone Billet Reservoir Kits to give a live example of level of quality which can be expected out of the entire kit from Tearstone Performance.

These kits are made from 6061-T6 Aircraft grade aluminum billet pieces for precision fitment over stock caps, except for the washer cap which is a direct replacement.

Kits are composed of the following parts:

Brake cap cover
Power steering cover
Washer cap


Optional:

5 speed cap cover
Polished kit


Please specify if you want machined or polished with your order!!!

To place your pre-order, please call 407-580-1667 with your credit card handy or paypal@tearstone.com and add 7% sales tax if you are a Florida resident.

Pictured below is a non polished brake cap currently in production:

Image


Image


Image


Machined vs. Polished

Image


Image


Polished power steering caps:

Image


Image


Kit Pre-Order PAID Customers

1. icedoutgalant +Polished - Shipped!
2. Dr. 9023G +5spd +Polished - Shipped!
3. Tracer Bullet +5spd + Polished - Shipped!
4. Antony C. +5spd +Polished - Shipped!
5. oneFastGTS +5spd - Shipped!
6. Phillip S. +Polished - Shipped!
7. BigMoneyDay +Polished - Shipped!
8. Quest +Polished - Shipped!
9. RedGalant1 +Polished - Shipped!
10. DANJ - Shipped!
11. DPayne - Shipped!
12. WPSypderGT - Shipped!
13. Pana_Rican_Lova +polished - Shipped!
14. totaleclipse213 +5spd - Shipped!
15. db00eclipse +5spd +polished - Shipped!
16. Ted F. +5psd - Shipped!
17. Devon S. +5psd +Polished - Shipped!
18. 03clipse3G +polished - Shipped!
19. Natedog_37 +5spd +Polished - Shipped!
20. 02galant +polished - Shipped!
21. kurtz7485 +5spd +polished - Shipped!
22. Dirtyboy +polished - Shipped!
23. Juma +polished - Shipped!
24. RWC +polished +5spd - Shipped!
25. Titanium2k2 - Shipped!
26. slvrstratrt +5spd +polished - Shipped!
27. dzulboytoy + polished - Shipped!
28. Greg A. +5spd +Polished - Shipped!
29. saboy +polished - Shipped!
30. tystang +5spd +polished - Shipped!
31. Domincano +polished - Shipped!
 
#12 ·
90everydirect said:
are you going to machine something like "Brake Fluid" on the brake fluid cover (or the respective other covers)?
This is a good idea. I would like to see this as well.

I'll be adding my name to the list soon. I'll call you directly that way you don't loose out on PayPal fees. :twothumb:
 
#13 ·
90everydirect said:
are you going to machine something like "Brake Fluid" on the brake fluid cover (or the respective other covers)?
Just for me to put my logo branding on it cost me $300 just for one cap, I don't think it is that important. I could put it on there in vinyl under the "Tearstone" if you like, just be sure to add that in with your order.
 
#17 ·
jabber said:
I know you mentioned in a previous thread about the fuse box cover also. Any chance in getting that included as well (knowing that the price will go up). I would like to get every part at once if possible.
I can add the Injen fuse box cover to your order :bigthumb:.

Since Injen makes a fuse box cover, I'm a little worried about investing in a product that has already saturated the market. I'm not opposed to making fuse box covers, but when I make these I have to make 100 of them at a time and there is a big decision I have to make at that point. I have a few other projects I am preparing for after this cap project I'm sure you all will be exicted about down the road :bigthumb:
 
#18 ·
Tearstone said:
I can add the Injen fuse box cover to your order :bigthumb:.

Since Injen makes a fuse box cover, I'm a little worried about investing in a product that has already saturated the market. I'm not opposed to making fuse box covers, but when I make these I have to make 100 of them at a time and there is a big decision I have to make at that point. I have a few other projects I am preparing for after this cap project I'm sure you all will be exicted about down the road :bigthumb:
Ok, thanks for the info. However, I don't want injen as I have an AEM V2 in the car now. Just don't think it would be that great looking together. I'll give you a call later today or tomorrow to get in on the group buy.
 
#23 ·
Russ, you seize to amaze me man...

The 3g world is finally gaining some great recognition and has some amazing things available. You should see about getting a tonneau cover made for the spyder's ;). Kazetech makes one, but I've never seen a 3g with one, so I don't know if I want to send my money for it. Maybe get intouch with them and get a group buy going or something?

When I get my money, definately purchasing one of these kits.
 
#25 ·
ARACHNO said:
Russ, you seize to amaze me man...

The 3g world is finally gaining some great recognition and has some amazing things available. You should see about getting a tonneau cover made for the spyder's ;). Kazetech makes one, but I've never seen a 3g with one, so I don't know if I want to send my money for it. Maybe get intouch with them and get a group buy going or something?

When I get my money, definately purchasing one of these kits.
That's a tall order to fill, and my concentration is primarily in the engine bay :)
 
Status
Not open for further replies.
You have insufficient privileges to reply here.