Anyone know where i can get a diamante intake manifold or aftermarket intake manifold for the 6g72 04 eclipse gt?

Try looking for a '03-up Eclipse GTS Intake manifold. It's very good for those who are planning/have FI.

 

Sweet thanx i forgot about the gts... Wouldnt happen to know any specific companies or sites that make them?

 

Sweet thanx i forgot about the gts... Wouldnt happen to know any specific companies or sites that make them?

Nope, sorry. No company makes aftermarket intake manifolds for our cars. Your choice is specifically restricted to:
1. '99+ Mitsubishi Diamante VRX
2. '03+ Mitsubishi Eclipse GTS

I hope that answers your question.

 

yes it does thank you

 

http://car-part.com

This might help ya out.

 

go to a scrap yard. I'm sure theres a few diamante's or GTS there possibly.

 

go to a scrap yard. I'm sure theres a few diamante's or GTS there possibly.

:agreed: Best spot to save money. If you get it somewhere else, it's going to be like $300+ where as if you go to a junkyard you can walk out with one for $150-$200. Oh yeah forgot to mention, but make sure you get all of it: The throttle position sensor, throttle body and all the little doo-hickeys because you can't use your GT's sensor on these.

 

I have a 2001 gt I can use a 03 intake manifold

 

I have a 2001 gt I can use a 03 intake manifold

Is that a question? If so, yes you can. Any GT model can use the '03+ GTS or '99 Diamante VRX intake manifolds.

 

ok. but can I use any 3g model gts intake manifold?

 

ok. but can I use any 3g model gts intake manifold?

I'm not sure on that. PM a member named TheFranchise and he'll tell you -- he's done the swap. Honestly, I don't think there is a difference, so I guess you can use the intake manifold off any GTS.

 

appreciate it

 

Yes, the GTS manifolds are all the same.

 

Give your stock manifold to Rezlo and he'll make you something worth having that will beat the socks off of the Diamante or GTS plenum.

 

Give your stock manifold to Rezlo and he'll make you something worth having that will beat the socks off of the Diamante or GTS plenum.

Rezlo?? :scratch: Details, pleez. Extrude honing or?

 

Give your stock manifold to Rezlo and he'll make you something worth having that will beat the socks off of the Diamante or GTS plenum.

yeah for real who is rezlo?

 

http://www.rezlo.com/Pages/sales.htm
Great guy. I have a few items from him. If you got any questions email him...or i might be able to answer them for ya

 

http://www.rezlo.com/Pages/sales.htm
Great guy. I have a few items from him. If you got any questions email him...or i might be able to answer them for ya

Very, very nice. Thank you. :yesway:

 

Has anyone purchased the short ram intake from this rezlo guy? if so how does it compare. Other question is my sister traded me cars recently, she is driving my 03 R/T and i have her 03 Spyder GT. Funny thing is she has the GTS intake! how is that or is that only on the spyders? any how I want to trade ours becasue the GTS intake would certainly be better for my nitrous since it has equal length intake runners, keep the front cylinders from running lean. Is there anything specific i need to know for this swap, will the rear support brakets mount the same?

 

With or without traction control? For the Diamante intake?

 

My manifolds arnt for the feint of heart, and no the manifold has nothing to do with the front bank running lean, look at my other posts if you want to know why,

My manifolds will only make a noticible difference on a built or FI motor,

I wouldnt bother if you have a stock engine, wont do a whole bunch of anything

 

so you make intake manifolds how much do you make for

 

Give your stock manifold to Rezlo and he'll make you something worth having that will beat the socks off of the Diamante or GTS plenum.

Rezlo's manifolds look awesome but I sill would like to know why are the runners so short?
Shorter runners = Less intake velocity = Less bottom end Torque, NO?
Is the gain in the mid to high horse power range?
How much more CFM does Rezlo's manifolds flow over a match ported Diamante VRX intake?
I would really like to see some tech info on this.

 

that is why he says they are not for NA..


they are mainly made for FI applications.

It made obvious gains.. and along with the boost, amazing topend and midrange.

 

that is why he says they are not for NA..


they are mainly made for FI applications.

It made obvious gains.. and along with the boost, amazing topend and midrange.

Could you please be a little more specific your gain and boost descriptions?
I’m not trying to be funny. I’m just always looking for something better.
Back when I went to Stage II (9psi shaft pulley) (Water/Methanol Injection Kit) (9.5:1 compression PISTONS) and we put on the Diamante VRX Intake Plenum on, we found the Vortech Blower making a solid 14psi with the VRX Intake Plenum the Ripp Full Length Headers / Apexi N1 full 3" Exhaust.