Does your aftermarket head unit have a built in amp?

 

not exactly sure... It's the Pioneer DEH-P5800MP. Are you supposed to hook up the blue wire coming from the 6-pin harness to the blue/white wire for the antennae? Are the Grey & White RCAs for the front output and the green & Purple for the rear? Also, is there a fuse on the stock amp that i might have blown?

 

not exactly sure... It's the Pioneer DEH-P5800MP. Are you supposed to hook up the blue wire coming from the 6-pin harness to the blue/white wire for the antennae? Are the Grey & White RCAs for the front output and the green & Purple for the rear? Also, is there a fuse on the stock amp that i might have blown?

Woah woah, slow down. If your new hu has a built in amp then don't use the stock one. Run the wires from the stock amp from each speaker directly to it's corrosponding wire on the back of your new hu.

 

Woah woah, slow down. If your new hu has a built in amp then don't use the stock one. Run the wires from the stock amp from each speaker directly to it's corrosponding wire on the back of your new hu.

is there a how to on this?

 

Yes, yes, what would be the most efficient and easy way to hook up my stock speakers to my new hu without pulling wires out from every which way?

 

Ya know, I found help thru someone else on this forum and they were more helpful than you. The whole reason i bought the Metra 70-7003 kit was so I COULD use my stock amp. I didn't want to go through all the work of re-wiring my car!

 

http://www.club3g.com/forum/showthread.php?t=57523 This may help you some.

 

no problem man, i would have posted it but i hadnt fully registered yet, but im glad i was of help.