Might go to see my fellow North Texans, car is def. not worthy of being shown though

 

Woot. Woot. Sign me up! Is registration up on the website yet?

Sent from my EVO 4G!!!

 

How much was it last year?

 

Free

 

Awesome. It sounds like it would be pretty cool to go to. I will probably consider going. Hopefully then I will meet some fellow 3ger's from the DFW area.

 

man.. thats the weekend after the Texas Region Auto-x Divisional (May 14-15)
I might be able to go to MOD if money is right at the time. If anyone from the are would allow me to park my car for the week on their garage/driveway I'd deff be able to go =)

 

U could park it at my house I live a out 5 to 10 miles from the dealership where mod will be.

Sent from my EVO 4G!!!

 

^^very much appreciated Justin =)

 

What r friends for!

Sent from my EVO 4G!!!

 

Turn off y'all's stupid mobile phone signatures, already :fawk:

I'm going to try to make an appearance this time around if for no other reason than to support the club.

 

Why don't u like the signature?!

SENT FROM MY EVO 4G!!!

 

:lol: Justin. I sense a comedy ban in the near future. Believe me... i had plenty :lol:

 

What is a comedy ban?

 

my a kb will show up with our vdubs

 

What?

Is MOD a good place to meet chicks? :naughty: :lol:

 

u

the charger threw a belt and took out the serp belt and bent one of the idle pullys for the charger, i replaced the belts and the pully and now the shop i dropped it off at told me i jumped timming and bent all my valves. i did all this damange at 2 mph while in netural rolling. i dont see how i did that. it sounded to me like the ac compressor locked up and the belt snapped. i hate the shop that i take it to but they are the only ones that i found in my town that will touch my car, everytime i go in there the prices change. i didnt have enough time to fool with it while i was home so i had it towed back to the house and covered up until i get home again. wish i could have been home for MOD

 

the charger threw a belt and took out the serp belt and bent one of the idle pullys for the charger, i replaced the belts and the pully and now the shop i dropped it off at told me i jumped timming and bent all my valves. i did all this damange at 2 mph while in netural rolling. i dont see how i did that. it sounded to me like the ac compressor locked up and the belt snapped. i hate the shop that i take it to but they are the only ones that i found in my town that will touch my car, everytime i go in there the prices change. i didnt have enough time to fool with it while i was home so i had it towed back to the house and covered up until i get home again. wish i could have been home for MOD

I did the AC belt on the KB's 4G64 just a couple months go. One way you know if that belt is alive is if you have power steering still. Check the A/C as well at idle. Do you hear it cycling on and off? Is it blowing cold, not cool air?

If you're timing belt jumped timing and bent the valves, it would have happened at the exact time the rest of it happened. You can also bend valves even at 2mph in neutral. As long as the engine is running. I'm not in DFW any more... but i do know other Techs in the area i worked with at Don Herring Mitsu in Irving.

My suggestion, do a compression check

 

Very funny guys

 

Dude, you walked right into that. I'd have comedy banned you about 3 hours before Shihab did, but I decided to wait until he'd at least seen your post first. :lol:

 

:lol: Justin's a lil mad. Relax brotha. He's done it to me like... 3 times. :lol:

 

Its all gravy but the chicken wing!

 

y

theres no compression i checked that before i left.

 

theres no compression i checked that before i left.

It'll probably be cheaper to find a used, but in good shape engine from a junkyard or used parts source than to rebuild it.

 

Kind of sucks that the event is on may 21st. Wish it was sooner but oh well, I guess that gives me more time to work on my first turbo build :ndance:. Only need a couple of parts left to have everything. If any of you guys in the dallas area have installed a turbo in the 3G and are willing to help me with the install (oil lines, gauge electronic wiring, EVO fuel injectors, etc) I would be happy to pay . Better than taking it somewhere and be charged like a grand or over lol.

 

If i was still in DFW i'd help ya no problem. 3 Hours away though now. lol. Anyways, no more chitter chat. Lets get this thread back on topic.

 

Only if i lived in north texas. God its boring down here in south tx.

 

IF Im in town, I'll try and make it and meet some of ya. I just got the car so no planned mods done yet. I might order some halo headlight assy, and start on the dash by then tho. Maybe my carputer will be done by then too.

 

damn I made plans to go to a meet in Lubbuck for that weekend. I might have to cancel those plans and try to take out the Eclipse that won best in it's Division

 

ok sooo what is the plan?? we meet up somewhere in the area early in the morning and then roll out together to the meet? I'd love to be there kida early because Im gonna have to swap tires..
Im planning on being at Justin's (thanx again) on friday night arround 9pm (depending on traffic)

 

Too early to make plans. I gotta wait to hear from Sherri like last year. Once i get to ok from here, we should be able to fill in all the technical questions. But if you're coming from Houston, i would get in touch with Pete (G-Spot) since he came from that area last year. (He's the guy with the white galant.

 

Just letting the Houston folks know that the Houston Area Lancer Owners (HALO) will be organizing the cruise to Dallas just like last year. I'll post full details whenever they get to it.

 

Just wanted to post and let you guys know the web site is up if you want to sign up to show your car, volunteer, sponsor, etc,

M.O.D.

 

G-spot! Hey im the guy with the black eclipse (duh!)) We met at the shell gas station on Imperial valley and 1960 before the PZ meet..
Alright then.. i'll wait :yesway:

 

 

Haha noo im planning on putting on my racing wheels and tires when we get to the meet and just for the show..and that normally takes me about 30min. I normally drive on stockers and all season tires.. but thanx for the help

 

Oooohhhhh I see well you should have time for that and I got tools if no one else does.

Sent from my EVO 4G!