just put on my stock rims that i painted black and recently blacked out the signals and the back up lights
![Image]()
![Image]()
![Image]()
![Image]()
Pictures of My Eclipse GT =]
LauraMills
81 - 100 of 109 Posts
Joined
·
158 Posts
thank you ! im hoping it comes out good toooo =]Awesome!I made the fog lights myself from some old round fog lights that I painted black, and some CCFL halos that I bought and attached to those fog lights. Good luck with the black/white theme, it can look amazing if you do it right
Joined
·
10,682 Posts
If you don't want to mess them up get another set. They're pretty cheap. The light with the lock in it comes out the same way as the other one. Behind the carpet lining is where the nuts are that hold them in place. It's not hard at all. You just got to be sure not to drop the nuts down into the chassis after you unscrew them.
Joined
·
158 Posts
The springs will be around $200 depending on which ones you get and the AGXs will probably run you around $400-450 depending on where you buy them. It's a worthy investment though
thank you ! =] i found eibach springs on craigslist for like $150, so maybe thats a possibilityyy
Joined
·
158 Posts
yeah im looking at new tail lights on ebay... i kinda like these ones
00 01 02 ECLIPSE LED JDM ALTEZZA TAIL LIGHTS SMOKE 2000: eBay Motors (item 290452546551 end time Jul-13-10 15:04:55 PDT)
i got new headlights not to long ago, hey are supposed to be halos but the halo dont light up, there was a random wire that came out the bottom and there was no instructions so i just left that wire alone
Joined
·
10,682 Posts
Actually those lights are OK. There's a member on here with that similar bubble taillight and it looked good on his 3G.
Joined
·
158 Posts
i kinda like them, im not like in love with them... i think id like smoked tail light covers better
Joined
·
158 Posts
ahh yess ! thank you !! i have a friend whos an electrician, he can do them im pretty sureeeIf you splice those wires into your running lights wires, then the halos will light up
Joined
·
10,682 Posts
:agreed: The taillight covers would be the better choice.
Joined
·
158 Posts
i agreeee =]
G
Guest
·Debadge those V6 emblems...It'll take 5 minutes and make a world of difference.
Joined
·
158 Posts
do you know how they are stuck on there
Joined
·
1,663 Posts
With adhesive maybe? Just get some dental floss to try to remove them. Slowly.
Joined
·
158 Posts
what if there is left over adhesive residue? i dont wanna any sticky spot on my car
Joined
·
158 Posts
you are so much help you know that ! hahaI used a thin plastic spatula on mine! They come off pretty easy if you heat the adhesive up some first, you can use a hair dryer for that
81 - 100 of 109 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
