Parts for Sale **Added some new stuff**
::New Parts Added at bottom of post::
I wont be able to ship things or get quotes until the weekend because I am in college and none of the parts are with me here at my dorm. So you have to bare with me on that.
Rear prothane motor mount for 4cy
![Image]()
![Image]()
![Image]()
$25 + shipping
Nice Chrome Plated Aluminum Oil Cap (it's actually pretty heavy)
![Image]()
![Image]()
![Image]()
$25+shipping
4cyl intake manifold
![Image]()
$25+shipping
4cyl TB
![Image]()
$25 + shipping
I have the bracket you have to remove to install the v6 TB if someone wants it also
![Image]()
4cyl SS valve cover bolts
![Image]()
$10 shipped
Hyperblack Rota Grids 18x8.5 +44 with General Exclaim UHP 235/40R18
If anyone is wondering why my rotors are so rusty it's because my car hasn't moved in a little over a month.
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
small curb rash on front passenger side wheel
![Image]()
I will include the larger P45R center caps to clear the front axle nut
![Image]()
P45R
![Image]()
Original
![Image]()
$1200 + shipping
3" Test pipe
![Image]()
![Image]()
$50 + shipping
Stock Front Rotors for the 4cyl
They have about 85K on them and the grey/silver stuff on the middle of them is just anti seize
$40 shipped
![Image]()
And RainX Beam Wipers. Not sure why I have these since they are not big enough to fit my car. But in case anyone wants them thought I would throw them on here. I forgot to make a note in my phone but I'm almost positive they are 16" and 20"
$10
![Image]()
Stock 4g64 front strut tower bar. When I took it off I didn't realize I still needed the mounting plates :lol: so it is just the bar.
$10 + shipping
![Image]()
Diamante Dual Piston Caliper cores and Pads
They may be able to be used and just dirty but I didn't want to advertise calipers and find out they could only be used as cores. I went to Autozone and they will save you around $190 if you are going to buy new. The pads actually have quite a bit of life on them too.
$100+shipping for everything
![Image]()
![Image]()
My quad foglight set up. They are halo foglights with a white halo. I really like the look of these but I think I like the look of the stock R/T fogs better now that I get to see them more. Everything is all wired up and ready to go. The just need to be wired into the car. I am including everything, even the custom brackets I made to mount them, even though they only fit the 2.5g stratus I don't have to include them if you don't want to. The wires between the fogs are extended to make it across the engine bay. The only thing I do not know for sure is if the wires from the relay make it far enough into the interior, I'm pretty sure they do but I'm not positive. I'm also including the 4 new bulbs I bought so that the lights are pure white. One of them is installed in the bottom right fog in the pictures. The two switches from the two sets are connected together so there is only one switch to activate both sets of foglights.
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
I'd like to get $100+shipping obo
the fogs were about $60 a set and then the bulbs I think were $10 per pair. So I figured that is a pretty fair price. If you don't feel the same way, pm me since it's obo just like pretty much everything I sell
2000W 2 Channel Amp. It's a Nitro-BMX. No need for it.
$100+shipping
![Image]()
Sub box built to hold 2 15" subs. Had this in my basement for awhile.
I assume this would cost a lot to ship but I will ship it if you want.
$25+shipping
![Image]()
**New Stuff I found**
Some of it is stratus stuff but most is interchangeable
![Image]()
![Image]()
![Image]()
![Image]()
Ok this is the stuff I found :lol: Everything is open to offers since I really don't know how much everything is worth exactly. I'll list some prices of what I think but don't be afraid to make me an offer.
The Stuff
From top left to right in the first picture. The others are just close ups.
-Turn signal sockets
-Metal switch I was going to use for my fogs
-Brand new foglight bulbs
-Wiring for foglights w/ pigtails for bulbs
-Relay to run foglights
-4cyl Valve cover gasket w/ spark plug tube seals *Brand New*
*Next Row*
-Stock orange turn signals
-Chrome plated turn signals (can see pics in my project log, loved the change in the look)
-9007 bulbs (only high beams work :lol: ) figured someone might have a use for them if their lights went out and they needed something
-Deep Red Pearl Paint (whatever the paint code is) I had to order a whole can for my retrofit was $40 for the can <_<
-Ingalls stiffy piston no brackets. Wouldn't be hard to make brackets for it that's why I bought it.
*Next Row*
-Radiator brackets
-Headlight bulb retaining rings
right below them
-52mm gauge hoods
-orange headlight reflector :lol: Figure someone might want to take their frustration out on it being so damn ugly. I'll just throw it in if you want it. Or I'll take a video of me smashing it with a hammer :lol:
*Last Row*
-MAF rubber filter adapters (3" and 3.5")
-stock MAF adapter
-more foglight pigtails TRS sent me some for some reason :lol:
-Stock oil cap
-I also have some center caps for Rota Grids but I would assume they would fit any Rotas. They DID NOT clear the front axle nut with the Grids on.
![Image]()
![Image]()
So yea. I know some is random but I figured someone could have a use for something. I think that is everything that I have. If I find more I'll list it.
::New Parts Added at bottom of post::
I wont be able to ship things or get quotes until the weekend because I am in college and none of the parts are with me here at my dorm. So you have to bare with me on that.
Rear prothane motor mount for 4cy
$25 + shipping
Nice Chrome Plated Aluminum Oil Cap (it's actually pretty heavy)
$25+shipping
4cyl intake manifold
$25+shipping
4cyl TB
$25 + shipping
I have the bracket you have to remove to install the v6 TB if someone wants it also
4cyl SS valve cover bolts
$10 shipped
Hyperblack Rota Grids 18x8.5 +44 with General Exclaim UHP 235/40R18
If anyone is wondering why my rotors are so rusty it's because my car hasn't moved in a little over a month.
small curb rash on front passenger side wheel
I will include the larger P45R center caps to clear the front axle nut
P45R
Original
$1200 + shipping
3" Test pipe
$50 + shipping
Stock Front Rotors for the 4cyl
They have about 85K on them and the grey/silver stuff on the middle of them is just anti seize
$40 shipped
And RainX Beam Wipers. Not sure why I have these since they are not big enough to fit my car. But in case anyone wants them thought I would throw them on here. I forgot to make a note in my phone but I'm almost positive they are 16" and 20"
$10
Stock 4g64 front strut tower bar. When I took it off I didn't realize I still needed the mounting plates :lol: so it is just the bar.
$10 + shipping
Diamante Dual Piston Caliper cores and Pads
They may be able to be used and just dirty but I didn't want to advertise calipers and find out they could only be used as cores. I went to Autozone and they will save you around $190 if you are going to buy new. The pads actually have quite a bit of life on them too.
$100+shipping for everything
My quad foglight set up. They are halo foglights with a white halo. I really like the look of these but I think I like the look of the stock R/T fogs better now that I get to see them more. Everything is all wired up and ready to go. The just need to be wired into the car. I am including everything, even the custom brackets I made to mount them, even though they only fit the 2.5g stratus I don't have to include them if you don't want to. The wires between the fogs are extended to make it across the engine bay. The only thing I do not know for sure is if the wires from the relay make it far enough into the interior, I'm pretty sure they do but I'm not positive. I'm also including the 4 new bulbs I bought so that the lights are pure white. One of them is installed in the bottom right fog in the pictures. The two switches from the two sets are connected together so there is only one switch to activate both sets of foglights.
I'd like to get $100+shipping obo
the fogs were about $60 a set and then the bulbs I think were $10 per pair. So I figured that is a pretty fair price. If you don't feel the same way, pm me since it's obo just like pretty much everything I sell
2000W 2 Channel Amp. It's a Nitro-BMX. No need for it.
$100+shipping
Sub box built to hold 2 15" subs. Had this in my basement for awhile.
I assume this would cost a lot to ship but I will ship it if you want.
$25+shipping
**New Stuff I found**
Some of it is stratus stuff but most is interchangeable
Ok this is the stuff I found :lol: Everything is open to offers since I really don't know how much everything is worth exactly. I'll list some prices of what I think but don't be afraid to make me an offer.
The Stuff
From top left to right in the first picture. The others are just close ups.
-Turn signal sockets
-Metal switch I was going to use for my fogs
-Brand new foglight bulbs
-Wiring for foglights w/ pigtails for bulbs
-Relay to run foglights
-4cyl Valve cover gasket w/ spark plug tube seals *Brand New*
*Next Row*
-Stock orange turn signals
-Chrome plated turn signals (can see pics in my project log, loved the change in the look)
-9007 bulbs (only high beams work :lol: ) figured someone might have a use for them if their lights went out and they needed something
-Deep Red Pearl Paint (whatever the paint code is) I had to order a whole can for my retrofit was $40 for the can <_<
-Ingalls stiffy piston no brackets. Wouldn't be hard to make brackets for it that's why I bought it.
*Next Row*
-Radiator brackets
-Headlight bulb retaining rings
right below them
-52mm gauge hoods
-orange headlight reflector :lol: Figure someone might want to take their frustration out on it being so damn ugly. I'll just throw it in if you want it. Or I'll take a video of me smashing it with a hammer :lol:
*Last Row*
-MAF rubber filter adapters (3" and 3.5")
-stock MAF adapter
-more foglight pigtails TRS sent me some for some reason :lol:
-Stock oil cap
-I also have some center caps for Rota Grids but I would assume they would fit any Rotas. They DID NOT clear the front axle nut with the Grids on.
So yea. I know some is random but I figured someone could have a use for something. I think that is everything that I have. If I find more I'll list it.
what happened ben. Pm me if you like also give me a price shipped to 28262 on the wheels
